{"id":4183979393071,"title":"N86 Trumpet Mouthpipe Dent Roller Kit","handle":"n86-trumpet-mouthpipe-dent-roller-kit","description":"\u003cp\u003eThe \u003cstrong\u003eN86 Trumpet Mouthpipe Dent Roller Kit\u003c\/strong\u003e consists of two parts:\u003cbr\u003e (1) The two-headed dent roller\u003cbr\u003e (2) The tapered mandrel with a stop sleeve.\u003cbr\u003e The two headed mandrel accomplishes several things. The curvature of the working surfaces of the roller works harmoniously with the curvature of the specially designed, floating, tapered mandrel. The other end of this mandrel works terrifically to take a dent out of a straight tuning slide for cornet, French horn, trumpet and mellophone. Since you will be applying equal pressure almost all the way around the mouthpipe, there is very little chance of producing egg shaped tubing if properly done. Also, the long mandrel inside the tubing gives you the leverage to work easier and retain more control. It has been said that this tool not only takes out dents, it actually remanufactures the mouthpipe.\u003cbr\u003e Heres how to use it:\u003cbr\u003e * Place the two headed dent roller in a strong vise\u003cbr\u003e * Remove the mouthpipe from the trumpet\u003cbr\u003e * Clean off solder and any other debris.\u003cbr\u003e * Slip the mandrel into the trumpet mouthpipe\u003cbr\u003e * Position the sliding sleeve so that the mouthpipe is against the sleeve and slightly loose on the mandrel.\u003cbr\u003e * Using the knurled screw, lock it in place so the mouthpipe cannot move up and wedge itself tightly on the mandrel. The end of the trumpet mouthpipe will push against the edge of the sleeve while you are using the tool. The mouthpipe must float at least by 1\/4 laterally.\u003cbr\u003e * Place the mouthpipe, with the mandrel inside, between the rollers and apply side pressure to push the mouthpipe against the rollers.\u003cbr\u003e * Push the mouthpipe and mandrel back and forth between the rollers (while still placing pressure). Rotate this mouthpipe\/mandrel constantly and the dent will be removed. For best results use both hands, one at each end of the rod.\u003c\/p\u003e","published_at":"2019-10-06T21:00:17-04:00","created_at":"2019-10-06T21:00:18-04:00","vendor":"Ferree's Tools Inc.","type":"Brasswind","tags":["Coronet","Trumpet"],"price":12925,"price_min":12925,"price_max":12925,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30358107947055,"title":"N86 Trumpet Mouthpipe Dent Roller Kit","option1":"N86 Trumpet Mouthpipe Dent Roller Kit","option2":null,"option3":null,"sku":"N86","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"N86 Trumpet Mouthpipe Dent Roller Kit - N86 Trumpet Mouthpipe Dent Roller Kit","public_title":"N86 Trumpet Mouthpipe Dent Roller Kit","options":["N86 Trumpet Mouthpipe Dent Roller Kit"],"price":12925,"weight":822,"compare_at_price":null,"inventory_quantity":9,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0397\/5557\/products\/N96.jpg?v=1574172873","\/\/cdn.shopify.com\/s\/files\/1\/0397\/5557\/products\/N96_2.jpg?v=1574173159","\/\/cdn.shopify.com\/s\/files\/1\/0397\/5557\/products\/N96_3.jpg?v=1574173204"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0397\/5557\/products\/N96.jpg?v=1574172873","options":["Sold By Each"],"media":[{"alt":null,"id":5696721682480,"position":1,"preview_image":{"aspect_ratio":1.333,"height":2736,"width":3648,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0397\/5557\/products\/N96.jpg?v=1574172873"},"aspect_ratio":1.333,"height":2736,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0397\/5557\/products\/N96.jpg?v=1574172873","width":3648},{"alt":"N86 Dent Roller Kit","id":5696722403376,"position":2,"preview_image":{"aspect_ratio":1.333,"height":2736,"width":3648,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0397\/5557\/products\/N96_2.jpg?v=1574172885"},"aspect_ratio":1.333,"height":2736,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0397\/5557\/products\/N96_2.jpg?v=1574172885","width":3648},{"alt":"N86 Dent Rollers","id":5696724009008,"position":3,"preview_image":{"aspect_ratio":1.333,"height":2736,"width":3648,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0397\/5557\/products\/N96_3.jpg?v=1574172896"},"aspect_ratio":1.333,"height":2736,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0397\/5557\/products\/N96_3.jpg?v=1574172896","width":3648}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe \u003cstrong\u003eN86 Trumpet Mouthpipe Dent Roller Kit\u003c\/strong\u003e consists of two parts:\u003cbr\u003e (1) The two-headed dent roller\u003cbr\u003e (2) The tapered mandrel with a stop sleeve.\u003cbr\u003e The two headed mandrel accomplishes several things. The curvature of the working surfaces of the roller works harmoniously with the curvature of the specially designed, floating, tapered mandrel. The other end of this mandrel works terrifically to take a dent out of a straight tuning slide for cornet, French horn, trumpet and mellophone. Since you will be applying equal pressure almost all the way around the mouthpipe, there is very little chance of producing egg shaped tubing if properly done. Also, the long mandrel inside the tubing gives you the leverage to work easier and retain more control. It has been said that this tool not only takes out dents, it actually remanufactures the mouthpipe.\u003cbr\u003e Heres how to use it:\u003cbr\u003e * Place the two headed dent roller in a strong vise\u003cbr\u003e * Remove the mouthpipe from the trumpet\u003cbr\u003e * Clean off solder and any other debris.\u003cbr\u003e * Slip the mandrel into the trumpet mouthpipe\u003cbr\u003e * Position the sliding sleeve so that the mouthpipe is against the sleeve and slightly loose on the mandrel.\u003cbr\u003e * Using the knurled screw, lock it in place so the mouthpipe cannot move up and wedge itself tightly on the mandrel. The end of the trumpet mouthpipe will push against the edge of the sleeve while you are using the tool. The mouthpipe must float at least by 1\/4 laterally.\u003cbr\u003e * Place the mouthpipe, with the mandrel inside, between the rollers and apply side pressure to push the mouthpipe against the rollers.\u003cbr\u003e * Push the mouthpipe and mandrel back and forth between the rollers (while still placing pressure). Rotate this mouthpipe\/mandrel constantly and the dent will be removed. For best results use both hands, one at each end of the rod.\u003c\/p\u003e"}

N86 Trumpet Mouthpipe Dent Roller Kit

Product Description

The N86 Trumpet Mouthpipe Dent Roller Kit consists of two parts:
(1) The two-headed dent roller
(2) The tapered mandrel with a stop sleeve.
The two headed mandrel accomplishes several things. The curvature of the working surfaces of the roller works harmoniously with the curvature of the specially designed, floating, tapered mandrel. The other end of this mandrel works terrifically to take a dent out of a straight tuning slide for cornet, French horn, trumpet and mellophone. Since you will be applying equal pressure almost all the way around the mouthpipe, there is very little chance of producing egg shaped tubing if properly done. Also, the long mandrel inside the tubing gives you the leverage to work easier and retain more control. It has been said that this tool not only takes out dents, it actually remanufactures the mouthpipe.
Heres how to use it:
* Place the two headed dent roller in a strong vise
* Remove the mouthpipe from the trumpet
* Clean off solder and any other debris.
* Slip the mandrel into the trumpet mouthpipe
* Position the sliding sleeve so that the mouthpipe is against the sleeve and slightly loose on the mandrel.
* Using the knurled screw, lock it in place so the mouthpipe cannot move up and wedge itself tightly on the mandrel. The end of the trumpet mouthpipe will push against the edge of the sleeve while you are using the tool. The mouthpipe must float at least by 1/4 laterally.
* Place the mouthpipe, with the mandrel inside, between the rollers and apply side pressure to push the mouthpipe against the rollers.
* Push the mouthpipe and mandrel back and forth between the rollers (while still placing pressure). Rotate this mouthpipe/mandrel constantly and the dent will be removed. For best results use both hands, one at each end of the rod.

Sku: N86
$ 129.25
Maximum quantity available reached.

Ferree's Tools Shipping Overview

  • We offer Free Shipping on all orders, ALL OVER THE WORLD!
  • We will ship your orders the most economical way. 
  • If you choose to pick your carrier, or next day shipping on your orders you WILL be charged the shipping cost.
  • Because of Federal Laws chemicals must ship via ground transportation.
  • Chemicals cannot be shipped overseas.
  • International Shipments, we cover the shipping cost only - we DO NOT cover the import duties/taxes charged by other countries, nor do we cover the extra carrier cost if imposed on the International shipment.
  • If you refuse to accept your order from the carrier for any reason and it is returned to us you will get a refund minus the return postage when it is received.  This apples to all domestic and International shipments.
  • If you refuse to accept your order from the carrier for any reason and it is not returned to us, you will not get a refund of your order.  This applies to all domestic and International shipments

Ferree's Tools Return Policy

Any return must have an RMA #.  Please contact the office to receive this number.

  • We appreciate your business and want you to be 100% satisfied.  If for any reason you need to return our products you must do so within 30 days in order to get a full refund.  Any return after 30 days is subject to a restocking fee determined by the amount of the order, condition of the item and age of the item being returned.
  • Returns are not accepted for any item after 180 days from the invoice date.
  • Returns are not accepted for any item that was manufactured per your instructions and are not our standard tools.
  • Any standard tool manufactured at Ferree’s is warranted to be free from defect for a period of 1 year.  We will at our discretion repair or replace your tool.  You must return the tool to Ferree’s for this warrant to be valid.

Ferree’s Tools
Helping the Instrument Repair Tech and Do it Yourselfers
for over 70 years.
Thank you for your continued support!

           

FERREE’S TOOLS INC
1477 E MICHIGAN AVENUE
BATTLE CREEK MICHIGAN 49014
TOLL FREE: 800-253-2261    PH:  269-965-0511   
FAX:   269-965-7719

WWW.FERREESTOOLSINC.COM

OFFICE HOURS 8:30-5:00 (EST)** PLANT HOURS 6:30-3:00 (EST)
FOR TECHNICAL ASSISTANCE DURING PLANT HOURS PLEASE CALL OR EMAIL CURTIS FERREE OR STEVE WILBUR
CURTIS@FERREESTOOLSINC.COM   269-224-6882
FERREESSHOP@OUTLOOK.COM   269-224-6877
 
OFFICE CONTACT INFORMATION
SALES   -   CELESTE WELLS
 
ACCTS RCV-CANDY RAY 
 CANDY@FERREESTOOLSINC.COM  269-224-6886
  
OFFICE MGR.-TAMI FERREE 
 TAMI@FERREESTOOLSINC.COM  269-224-6881
 
“ WE SELL ONLY THE BEST AND WE SELL TO EVERYONE”
 
ORDERING GUIDELINES
  • Phone orders are taken Monday through Friday 8:30am – 3:00pm Eastern Standard Time
  • Fax and email orders can be sent anytime and will be processed on the next business day. 
  • Web store orders are taken 24/7/365 and will be processed on the next business day. 
  • There is a $25.00 minimum for all orders.
  • Changes to orders after they are placed will be subject to a 15.00 handling fee.
  • Rush orders are accepted and will ship same day if placed before 11:00am or next day if placed after 11:00am (est).  Rush fees are listed below
               Order value                           Fee
                              Up to 100.00      $15.00
                              100.01-500.00   $20.00
                              Over 500.00        $25.00
 
PAYMENT OPTIONS
  • ALL orders must be paid for in advance of shipping unless you have established an account. 
  • Credit Card     
    •  Visa, MasterCard, Discover and American Express are  accepted.
  • PayPal             
    • Use your PayPal account to pay directly from your bank.  We can use this for net 30 customers as well.
  • Chk in Advance 
    • If you wish to pay by check we will email you an invoice for your order.  Your order will not ship until the payment has cleared the bank.  This could result in delayed shipping.
  • Open Accts        
    • All open accounts are subject to credit approval.  If you have not placed an order in over a year your account will be reviewed prior to shipping a new order.  Strict 30 day terms for all open accounts.  A 1.5% charge will be added to all past due balances.
 
 
PLEASE INCLUDE YOUR CUSTOMER I.D. ON ALL INQUIRIES, ORDERS, PAYMENTS AND RETURNS TO ENSURE PROPER PROCESSING.
 
 
 
 
PRICING INFORMATION
  • PLEASE VISIT THE WEBSITE FOR UP TO DATE PRICING
  • Prices are in U.S. Dollars and are subject to change without notice.
  • Discounts are listed on the web store for bulk purchases of certain items.
  • Quotes are valid for 30 days.  No exceptions.
 
SHIPPING
  • We offer Free Shipping on all orders, ALL OVER THE WORLD!
  • We will ship your orders the most economical way. 
  • If you choose to pick your carrier, or next day shipping on your orders you WILL be charged the shipping cost.
  • Because of Federal Laws chemicals must ship via ground transportation.
  • Chemicals cannot be shipped overseas.
  • International Shipments, we cover the shipping cost only - we DO NOT cover the import duties/taxes charged by other countries, nor do we cover the extra carrier cost if imposed on the International shipment.
  • If you refuse to accept your order from the carrier for any reason and it is returned to us you will get a refund minus the return postage when it is received.  This apples to all domestic and International shipments.
  • If you refuse to accept your order from the carrier for any reason and it is not returned to us, you will not get a refund of your order.  This applies to all domestic and International shipments
 
RETURN POLICY
Any return must have an RMA #.  Please contact the office to receive this number.
  • We appreciate your business and want you to be 100% satisfied.  If for any reason you need to return our products you must do so within 30 days in order to get a full refund.  Any return after 30 days is subject to a restocking fee determined by the amount of the order, condition of the item and age of the item being returned.
  • Returns are not accepted for any item after 180 days from the invoice date.
  • Returns are not accepted for any item that was manufactured per your instructions and are not our standard tools.
  • Any standard tool manufactured at Ferree’s is warranted to be free from defect for a period of 1 year.  We will at our discretion repair or replace your tool.  You must return the tool to Ferree’s for this warrant to be valid.
  • If you refuse to accept your order from the carrier for any reason and it is returned to us you will get a refund minus the return postage when it is received.  This apples to all domestic and International shipments.
  • If you refuse to accept your order from the carrier for any reason and it is not returned to us, you will not get a refund of your order.  This applies to all domestic and International shipments
 
THANK YOU FOR CHOOSING FERREE’S

Related Products