{"id":4183905173551,"title":"H59 Tenon Expander","handle":"h59-tenon-expander","description":"\u003cp\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=gJTLEuI-kuk\"\u003e\u003cstrong\u003ehttps:\/\/youtu.be\/gJTLEuI-kuk\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e  WATCH VIDEO ON USE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eH59 Can Opener Style Tenon Expander\u003c\/strong\u003e for flutes, saxes, bass clarinets.\u003cbr\u003e  The \u003cstrong\u003eH59\u003c\/strong\u003e was recently redesigned to offer more flexibility in tightening metal tenons. Used on flutes, saxes, bass clarinets, etc. The metal in the necks of some bass clarinets and saxophones are a lot thicker than other instrument tenons.\u003cbr\u003e  This is why conventional methods of enlarging the tenon sometimes will not be as successful as when using this tool. Also the curve of a bass clarinet neck sometimes presents a problem on old style tenon expanders. \u003cbr\u003e  The first accessory developed is the H59A set of rollers to stretch or extrude solid hinge tubes in lieu of swedging; this helps save the finish and helps make the key longer and stronger. Especially handy for use on the hi-E and low C# keys on many saxes, the whisper key on most bassoons and the f-lever on various clarinets. There are three radii sizes for clarinet, saxes and bassoon. \u003cbr\u003e  Not much squeezing is required, so, proceed cautiously until you get used to the effect of the mechanism. These rollers do a beautiful finished job, in most cases preserving the plating or lacquer by advancing pressure, slowly. \u003cbr\u003e  Keep key on straight course. You may want to leave the key  little bit oval or slightly squared (NOT ENOUGH TO NOTICE) to increase the strength through the small amount of work hardening that naturally happens and to help prevent twisting or torqueing of the shaft while the instrument is being played.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003eDo NOT just clamp down and start cranking, be discreet.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003e\u003cstrong\u003eH59A\u003c\/strong\u003e Triple Key Extruder \u003cbr\u003e\u003cstrong\u003eH59B\u003c\/strong\u003e Soprano Sax\/Piccolo Roller\u003c\/p\u003e\n\u003cp style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003eH59ABS - SET OF ALL THREE TOOLS AT 25% DISCOUNT\u003c\/p\u003e","published_at":"2019-10-06T20:01:10-04:00","created_at":"2019-10-06T20:01:10-04:00","vendor":"Ferree's Tools Inc.","type":"Woodwind","tags":["Saxophone"],"price":13391,"price_min":13391,"price_max":55000,"available":true,"price_varies":true,"compare_at_price":57572,"compare_at_price_min":57572,"compare_at_price_max":57572,"compare_at_price_varies":false,"variants":[{"id":30357671739439,"title":"H59 Tenon Expander","option1":"H59 Tenon Expander","option2":null,"option3":null,"sku":"H59","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"H59 Tenon Expander - H59 Tenon Expander","public_title":"H59 Tenon Expander","options":["H59 Tenon Expander"],"price":25844,"weight":3629,"compare_at_price":null,"inventory_quantity":492,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":30357671772207,"title":"H59A Triple Key Extruder","option1":"H59A Triple Key Extruder","option2":null,"option3":null,"sku":"H59A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"H59 Tenon Expander - H59A Triple Key Extruder","public_title":"H59A Triple Key Extruder","options":["H59A Triple Key Extruder"],"price":20347,"weight":283,"compare_at_price":null,"inventory_quantity":47,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":30357671804975,"title":"H59B Soprano Sax\/Piccolo Roller","option1":"H59B Soprano Sax\/Piccolo Roller","option2":null,"option3":null,"sku":"H59B","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"H59 Tenon Expander - H59B Soprano Sax\/Piccolo Roller","public_title":"H59B Soprano Sax\/Piccolo Roller","options":["H59B Soprano Sax\/Piccolo Roller"],"price":13391,"weight":397,"compare_at_price":null,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":40734505926704,"title":"SET OF ALL THREE TOOL H59, H59A, H59B","option1":"SET OF ALL THREE TOOL H59, H59A, H59B","option2":null,"option3":null,"sku":"H59ABS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"H59 Tenon Expander - SET OF ALL THREE TOOL H59, H59A, H59B","public_title":"SET OF ALL THREE TOOL H59, H59A, H59B","options":["SET OF ALL THREE TOOL H59, H59A, H59B"],"price":55000,"weight":3629,"compare_at_price":57572,"inventory_quantity":497,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.ferreestoolsinc.com\/cdn\/shop\/products\/H59.jpg?v=1579546988","\/\/www.ferreestoolsinc.com\/cdn\/shop\/products\/H59A.jpg?v=1579610865","\/\/www.ferreestoolsinc.com\/cdn\/shop\/products\/H59B.jpg?v=1579611683"],"featured_image":"\/\/www.ferreestoolsinc.com\/cdn\/shop\/products\/H59.jpg?v=1579546988","options":["Sold By Each"],"media":[{"alt":null,"id":6267260338224,"position":1,"preview_image":{"aspect_ratio":1.333,"height":2736,"width":3648,"src":"\/\/www.ferreestoolsinc.com\/cdn\/shop\/products\/H59.jpg?v=1579546988"},"aspect_ratio":1.333,"height":2736,"media_type":"image","src":"\/\/www.ferreestoolsinc.com\/cdn\/shop\/products\/H59.jpg?v=1579546988","width":3648},{"alt":"H59A Triple Key Extruder","id":6273024294960,"position":2,"preview_image":{"aspect_ratio":1.333,"height":2736,"width":3648,"src":"\/\/www.ferreestoolsinc.com\/cdn\/shop\/products\/H59A.jpg?v=1579610865"},"aspect_ratio":1.333,"height":2736,"media_type":"image","src":"\/\/www.ferreestoolsinc.com\/cdn\/shop\/products\/H59A.jpg?v=1579610865","width":3648},{"alt":"H59B Soprano Sax\/Piccolo Roller","id":6273068433456,"position":3,"preview_image":{"aspect_ratio":1.333,"height":2736,"width":3648,"src":"\/\/www.ferreestoolsinc.com\/cdn\/shop\/products\/H59B.jpg?v=1579611683"},"aspect_ratio":1.333,"height":2736,"media_type":"image","src":"\/\/www.ferreestoolsinc.com\/cdn\/shop\/products\/H59B.jpg?v=1579611683","width":3648}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=gJTLEuI-kuk\"\u003e\u003cstrong\u003ehttps:\/\/youtu.be\/gJTLEuI-kuk\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e  WATCH VIDEO ON USE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eH59 Can Opener Style Tenon Expander\u003c\/strong\u003e for flutes, saxes, bass clarinets.\u003cbr\u003e  The \u003cstrong\u003eH59\u003c\/strong\u003e was recently redesigned to offer more flexibility in tightening metal tenons. Used on flutes, saxes, bass clarinets, etc. The metal in the necks of some bass clarinets and saxophones are a lot thicker than other instrument tenons.\u003cbr\u003e  This is why conventional methods of enlarging the tenon sometimes will not be as successful as when using this tool. Also the curve of a bass clarinet neck sometimes presents a problem on old style tenon expanders. \u003cbr\u003e  The first accessory developed is the H59A set of rollers to stretch or extrude solid hinge tubes in lieu of swedging; this helps save the finish and helps make the key longer and stronger. Especially handy for use on the hi-E and low C# keys on many saxes, the whisper key on most bassoons and the f-lever on various clarinets. There are three radii sizes for clarinet, saxes and bassoon. \u003cbr\u003e  Not much squeezing is required, so, proceed cautiously until you get used to the effect of the mechanism. These rollers do a beautiful finished job, in most cases preserving the plating or lacquer by advancing pressure, slowly. \u003cbr\u003e  Keep key on straight course. You may want to leave the key  little bit oval or slightly squared (NOT ENOUGH TO NOTICE) to increase the strength through the small amount of work hardening that naturally happens and to help prevent twisting or torqueing of the shaft while the instrument is being played.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003eDo NOT just clamp down and start cranking, be discreet.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003e\u003cstrong\u003eH59A\u003c\/strong\u003e Triple Key Extruder \u003cbr\u003e\u003cstrong\u003eH59B\u003c\/strong\u003e Soprano Sax\/Piccolo Roller\u003c\/p\u003e\n\u003cp style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003eH59ABS - SET OF ALL THREE TOOLS AT 25% DISCOUNT\u003c\/p\u003e"}

H59 Tenon Expander

Product Description

https://youtu.be/gJTLEuI-kuk

  WATCH VIDEO ON USE

 

H59 Can Opener Style Tenon Expander for flutes, saxes, bass clarinets.
  The H59 was recently redesigned to offer more flexibility in tightening metal tenons. Used on flutes, saxes, bass clarinets, etc. The metal in the necks of some bass clarinets and saxophones are a lot thicker than other instrument tenons.
  This is why conventional methods of enlarging the tenon sometimes will not be as successful as when using this tool. Also the curve of a bass clarinet neck sometimes presents a problem on old style tenon expanders.
  The first accessory developed is the H59A set of rollers to stretch or extrude solid hinge tubes in lieu of swedging; this helps save the finish and helps make the key longer and stronger. Especially handy for use on the hi-E and low C# keys on many saxes, the whisper key on most bassoons and the f-lever on various clarinets. There are three radii sizes for clarinet, saxes and bassoon.
  Not much squeezing is required, so, proceed cautiously until you get used to the effect of the mechanism. These rollers do a beautiful finished job, in most cases preserving the plating or lacquer by advancing pressure, slowly.
  Keep key on straight course. You may want to leave the key  little bit oval or slightly squared (NOT ENOUGH TO NOTICE) to increase the strength through the small amount of work hardening that naturally happens and to help prevent twisting or torqueing of the shaft while the instrument is being played.

Do NOT just clamp down and start cranking, be discreet.

H59A Triple Key Extruder
H59B Soprano Sax/Piccolo Roller

H59ABS - SET OF ALL THREE TOOLS AT 25% DISCOUNT

Sku: H59
$ 258.44
Maximum quantity available reached.

Ferree's Tools Shipping Overview

  • We offer Free Shipping on all orders, ALL OVER THE WORLD!
  • We do charge a handling fee (much less than the cost of shipping) extra packaging precautions to ensure safe and timely delivery.
  • We will ship your orders the most economical way. 
  • If your package is delivered and then stolen Ferree's is not responsible.  If you live in an area prone to stealing please have your package shipped to a ship station or post office so that you can pick it up.
  • If you choose to pick your carrier, or next day shipping on your orders you WILL be charged the shipping cost.
  • Because of Federal Laws chemicals must ship via ground transportation.
  • Chemicals cannot be shipped overseas.
  • International Shipments, we cover the shipping cost only - we DO NOT cover the import duties/taxes charged by other countries, nor do we cover the extra carrier cost if imposed on the International shipment.
  • If you refuse to accept your order from the carrier for any reason and it is returned to us you will get a refund minus the return postage when it is received.  This apples to all domestic and International shipments.
  • If you refuse to accept your order from the carrier for any reason and it is not returned to us, you will not get a refund of your order.  This applies to all domestic and International shipments

Ferree's Tools Return Policy

Any return must have an RMA #.  Please contact the office to receive this number.

  • We appreciate your business and want you to be 100% satisfied.  If for any reason you need to return our products you must do so within 30 days in order to get a full refund.  Any return after 30 days is subject to a restocking fee determined by the amount of the order, condition of the item and age of the item being returned.
  • Returns are not accepted for any item after 180 days from the invoice date.
  • Returns are not accepted for any item that was manufactured per your instructions and are not our standard tools.
  • If you request a return and it is determined that the tool has been used you will be charged a repair charge and restocking fee.
  • Any standard tool manufactured at Ferree’s is warranted to be free from defect for a period of 1 year.  We will at our discretion repair or replace your tool.  You must return the tool to Ferree’s for this warranty to be valid.
  • We will refund shipping cost to return the item if it is within the 30 day timeframe.  If it is beyond the 30 days the customer pays return shipping.  If the item is damaged during return shipping we will charge you for the repair of the damage.  Shop rate is 90.00/hr.

Ferree’s Tools
Helping the Instrument Repair Tech and Do it Yourselfers
for over 75 years.
Thank you for your continued support!
           
FERREE’S TOOLS INC
1477 E MICHIGAN AVENUE
BATTLE CREEK MICHIGAN 49014
TOLL FREE: 800-253-2261    PH:  269-965-0511   
FAX:   269-965-7719
OFFICE HOURS 8:30-3:00 (EST)**
PLANT HOURS 6:30-3:00 (EST)
TECHNICAL ASSISTANCE
Please call the office and we will direct your call.  If you prefer to email please  send to Steve@ferreestoolsinc.com                        
 
OFFICE CONTACT INFORMATION
CANDY RAY 
 CANDY@FERREESTOOLSINC.COM  269-224-6886
  
OFFICE MGR.-TAMI FERREE 
 TAMI@FERREESTOOLSINC.COM  269-224-6881
 
“ WE SELL ONLY THE BEST AND WE SELL TO EVERYONE”
 
ORDERING GUIDELINES
  • Phone orders are taken Monday through Friday 8:30am – 3:00pm Eastern Standard Time
  • Email orders can be sent anytime and will be processed on the next business day. 
  • Web store orders are taken 24/7/365 and will be processed on the next business day. 
  • There is a $25.00 minimum for all orders.
  • Changes to orders after they are placed will be subject to a 15.00 handling fee.
  • Rush orders are accepted and will ship same day if placed before 11:00am or next day if placed after 11:00am (est).  Rush fees are listed below
               Order value                           Fee
                              Up to 100.00      $15.00
                              100.01-500.00   $20.00
                              Over 500.00        $25.00
 
PAYMENT OPTIONS
  • ALL orders must be paid for in advance of shipping unless you have established an account. 
  • Credit Card     
    •  Visa, MasterCard, Discover and American Express are  accepted.
  • PayPal             
    • Use your PayPal account to pay directly from your bank.  We can use this for net 30 customers as well.
  • Chk in Advance 
    • If you wish to pay by check we will email you an invoice for your order.  Your order will not ship until the payment has cleared the bank.  This could result in delayed shipping.
  • Open Accts        
    • All open accounts are subject to credit approval.  If you have not placed an order in over a year your account will be reviewed prior to shipping a new order.  Strict 30 day terms for all open accounts.  
 
 
PLEASE INCLUDE YOUR CUSTOMER I.D. ON ALL INQUIRIES, ORDERS, PAYMENTS AND RETURNS TO ENSURE PROPER PROCESSING.
 
 
 
 
PRICING INFORMATION
  • PLEASE VISIT THE WEBSITE FOR UP TO DATE PRICING
  • Prices are in U.S. Dollars and are subject to change without notice.
  • Discounts are listed on the web store for bulk purchases of certain items.
  • Quotes are valid for 30 days.  No exceptions.
 
SHIPPING
  • We offer Free Shipping on all orders.
  • We do charge a handling fee which is far less than the shipping cost)
  • We will ship your orders the most economical way. 
  • If you choose to pick your carrier, or next day shipping on your orders you WILL be charged the shipping cost.
  • Because of Federal Laws chemicals must ship via ground transportation.
  • Chemicals cannot be shipped overseas.
  • International Shipments - we DO NOT cover the import duties/taxes charged by other countries, nor do we cover the extra carrier cost if imposed on the International shipment.
  • If you refuse to accept your order from the carrier for any reason and it is returned to us you will get a refund minus the return postage when it is received.  This apples to all domestic and International shipments.
  • If you refuse to accept your order from the carrier for any reason and it is not returned to us, you will not get a refund of your order.  This applies to all domestic and International shipments
 
RETURN POLICY
Any return must have an RMA #.  Please contact the office to receive this number.
  • We appreciate your business and want you to be 100% satisfied.  If for any reason you need to return our products you must do so within 30 days in order to get a full refund.  Any return after 30 days is subject to a restocking fee determined by the amount of the order, condition of the item and age of the item being returned.  Freight for the return is not always refunded.  We determine this on a case by case basis.
  • Returns are not accepted for any item after 180 days from the invoice date.
  • Returns are not accepted for any item that was manufactured per your instructions and are not our standard tools.
  • Any standard tool manufactured at Ferree’s is warranted to be free from defect for a period of 1 year.  We will at our discretion repair or replace your tool.  You must return the tool to Ferree’s for this warrant to be valid.
  • If you request a return and it is determined that the tool has been used you will be charged a repair charge and restocking fee.
  • If you refuse to accept your order from the carrier for any reason and it is returned to us you will get a refund minus the return postage when it is received.  This apples to all domestic and International shipments.
  • If you refuse to accept your order from the carrier for any reason and it is not returned to us, you will not get a refund of your order.  This applies to all domestic and International shipments
 
THANK YOU FOR CHOOSING FERREE’S

Related Products