{"id":4183876993071,"title":"G54 Bass Clarinet Tone Hole Undercutter (7 cutters)","handle":"g54-bass-clarinet-tonehole-undercutters","description":"\u003cp\u003e\u003cspan\u003e This tool was developed at the request of several Repairmen. These Repairmen had been getting requests to undercut the tone holes on bass and soprano clarinets. Accomplished players feel that this undercutting improves the tone, response and clarity of many of the notes on the clarinet.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e  This tool accomplishes the undercutting that is already standard on many French manufactured clarinets. Now you can perform the procedure on any clarinet. \u003c\/span\u003e\u003cstrong\u003eFerree's \u003cspan\u003e\u003ca href=\"https:\/\/www.ferreestoolsinc.com\/products\/g53-clarinet_tonehole_undercutters?variant=1107211172\"\u003e\u003cspan style=\"color: #0000ff;\"\u003eG53 Soprano Clarinet Tone Hole Under cutter\u003c\/span\u003es\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e and \u003c\/span\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/www.ferreestoolsinc.com\/products\/g54-bass_clarinet_tonehole_undercutters?variant=1107024724\" style=\"color: #0000ff;\"\u003e\u003cstrong\u003eG54 Bass Clarinet Tone Hole Under cutters\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e make this undercutting a simple task.\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e1.\u003c\/strong\u003e\u003cspan\u003e Choose one of the \u003c\/span\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/www.ferreestoolsinc.com\/products\/g53-clarinet_tonehole_undercutters?variant=1107211172\" style=\"color: #0000ff;\"\u003e\u003cstrong\u003eG53\u003c\/strong\u003e \u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003eor \u003c\/span\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/www.ferreestoolsinc.com\/products\/g54-bass_clarinet_tonehole_undercutters?variant=1107024724\" style=\"color: #0000ff;\"\u003e\u003cstrong\u003eG54\u003c\/strong\u003e \u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003eUnder cutters that matches the tone hole you will be cutting.\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e2.\u003c\/strong\u003e\u003cspan\u003e Slide the keyed slot in the bottom of the cutter over the keyed part of the insertion rod.\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e3.\u003c\/strong\u003e\u003cspan\u003e Slide insertion rod (with the cutter resting on it) into the end of the clarinet joint. By looking thru the tone hole, stop the cutter directly under the hole you will be working on.\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e4.\u003c\/strong\u003e\u003cspan\u003e Insert the threaded T handle down thru the tone hole and screw it into the under cutter. \u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e5.\u003c\/strong\u003e\u003cspan\u003e Pull out the insertion rod from the clarinet joint.\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e6.\u003c\/strong\u003e\u003cspan\u003e After the hole has been undercut, return the insertion rod into the clarinet joint and insert the keyed end back into the key way in the under cutter. (Cont. top of next column) \u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e7.\u003c\/strong\u003e\u003cspan\u003e Now you can unscrew the T handle from the cutter and pull out the insertion rod out of the clarinet. The cutter will come out with the rod.\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e8. \u003c\/strong\u003e\u003cspan\u003eWhile holding the clarinet joint, pull up on the T handle and twist it clockwise. This will pull the undercutter against the inside of the tone hole. The clockwise turning will remove the material making a perfect tapered opening. It normally only requires a few turns of the handle (5 or 6). Not a lot of upward pressure is necessary. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e-A \u003c\/span\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/www.ferreestoolsinc.com\/products\/g53-clarinet_tonehole_undercutters?variant=1107211172\" style=\"color: #0000ff;\"\u003e\u003cstrong\u003eG53 Soprano Clarinet Undercutter set\u003c\/strong\u003e \u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003econsists of the 12\" insertion rod, three T handles, and six precision cutters. \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e-A \u003c\/span\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/www.ferreestoolsinc.com\/products\/g54-bass_clarinet_tonehole_undercutters?variant=1107024724\" style=\"color: #0000ff;\"\u003e\u003cstrong\u003eG54 Bass Clarinet Undercutter set\u003c\/strong\u003e \u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003econsists of the 36\" insertion rod, two T handles and seven precision cutters.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan\u003eAvailable:\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/www.ferreestoolsinc.com\/products\/g53-clarinet_tonehole_undercutters?variant=1107211172\" style=\"color: #0000ff;\"\u003e\u003cstrong\u003eG53 Clarinet Tone Hole Undercutter\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e (6 cutters)\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/www.ferreestoolsinc.com\/products\/g54-bass_clarinet_tonehole_undercutters?variant=1107024724\" style=\"color: #0000ff;\"\u003e\u003cstrong\u003eG54\u003c\/strong\u003e \u003cstrong\u003eBass Clarinet Tone Hole Undercutter\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e (7 cutters)\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/www.ferreestoolsinc.com\/products\/g54-bass_clarinet_tonehole_undercutters?variant=1107024724\" style=\"color: #0000ff;\"\u003e\u003cstrong\u003eG54A\u003c\/strong\u003e, \u003cstrong\u003eB\u003c\/strong\u003e \u003cstrong\u003eIndividual handles for G54\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/www.ferreestoolsinc.com\/products\/g54-bass_clarinet_tonehole_undercutters?variant=1107024724\" style=\"color: #0000ff;\"\u003e\u003cstrong\u003eG54C\u003c\/strong\u003e \u003cstrong\u003eInsertion Rod for G54\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/www.ferreestoolsinc.com\/products\/g55-insertion_rod_only_for_alto_clarinet?variant=1107211208\" style=\"color: #0000ff;\"\u003e\u003cstrong\u003eG55\u003c\/strong\u003e \u003cstrong\u003eInsertion Rod-Alto Clarinet\u003c\/strong\u003e\u003c\/a\u003e \u003c\/span\u003e\u003c\/p\u003e","published_at":"2019-10-06T19:37:52-04:00","created_at":"2019-10-06T19:37:53-04:00","vendor":"Ferree's Tools Inc.","type":"Woodwind","tags":["Bassoon","Clarinet","Oboe"],"price":1668,"price_min":1668,"price_max":36245,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30357566357551,"title":"G54 Bass Clarinet Tone Hole Undercutter (7 cutters)","option1":"G54 Bass Clarinet Tone Hole Undercutter (7 cutters)","option2":null,"option3":null,"sku":"G54","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"G54 Bass Clarinet Tone Hole Undercutter (7 cutters) - G54 Bass Clarinet Tone Hole Undercutter (7 cutters)","public_title":"G54 Bass Clarinet Tone Hole Undercutter (7 cutters)","options":["G54 Bass Clarinet Tone Hole Undercutter (7 cutters)"],"price":36245,"weight":1055,"compare_at_price":null,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"deny","barcode":null},{"id":30357566390319,"title":"G54A Individual handle for G54","option1":"G54A Individual handle for G54","option2":null,"option3":null,"sku":"G54A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"G54 Bass Clarinet Tone Hole Undercutter (7 cutters) - G54A Individual handle for G54","public_title":"G54A Individual handle for G54","options":["G54A Individual handle for G54"],"price":1668,"weight":28,"compare_at_price":null,"inventory_quantity":15050,"inventory_management":"shopify","inventory_policy":"deny","barcode":null},{"id":30357566423087,"title":"G54B Individual handle for G54","option1":"G54B Individual handle for G54","option2":null,"option3":null,"sku":"G54B","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"G54 Bass Clarinet Tone Hole Undercutter (7 cutters) - G54B Individual handle for G54","public_title":"G54B Individual handle for G54","options":["G54B Individual handle for G54"],"price":1668,"weight":28,"compare_at_price":null,"inventory_quantity":15050,"inventory_management":"shopify","inventory_policy":"deny","barcode":null},{"id":30357566455855,"title":"G54C Insertion Rod for G54","option1":"G54C Insertion Rod for G54","option2":null,"option3":null,"sku":"G54C","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"G54 Bass Clarinet Tone Hole Undercutter (7 cutters) - G54C Insertion Rod for G54","public_title":"G54C Insertion Rod for G54","options":["G54C Insertion Rod for G54"],"price":2473,"weight":907,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0397\/5557\/products\/G54.jpg?v=1580236823","\/\/cdn.shopify.com\/s\/files\/1\/0397\/5557\/products\/G54a.jpg?v=1580237368"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0397\/5557\/products\/G54.jpg?v=1580236823","options":["Select Item"],"media":[{"alt":null,"id":6318813020208,"position":1,"preview_image":{"aspect_ratio":1.333,"height":2736,"width":3648,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0397\/5557\/products\/G54.jpg?v=1580236823"},"aspect_ratio":1.333,"height":2736,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0397\/5557\/products\/G54.jpg?v=1580236823","width":3648},{"alt":"G54 Cutter close up","id":6318860206128,"position":2,"preview_image":{"aspect_ratio":1.333,"height":2736,"width":3648,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0397\/5557\/products\/G54a.jpg?v=1580237292"},"aspect_ratio":1.333,"height":2736,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0397\/5557\/products\/G54a.jpg?v=1580237292","width":3648}],"content":"\u003cp\u003e\u003cspan\u003e This tool was developed at the request of several Repairmen. These Repairmen had been getting requests to undercut the tone holes on bass and soprano clarinets. Accomplished players feel that this undercutting improves the tone, response and clarity of many of the notes on the clarinet.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e  This tool accomplishes the undercutting that is already standard on many French manufactured clarinets. Now you can perform the procedure on any clarinet. \u003c\/span\u003e\u003cstrong\u003eFerree's \u003cspan\u003e\u003ca href=\"https:\/\/www.ferreestoolsinc.com\/products\/g53-clarinet_tonehole_undercutters?variant=1107211172\"\u003e\u003cspan style=\"color: #0000ff;\"\u003eG53 Soprano Clarinet Tone Hole Under cutter\u003c\/span\u003es\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e and \u003c\/span\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/www.ferreestoolsinc.com\/products\/g54-bass_clarinet_tonehole_undercutters?variant=1107024724\" style=\"color: #0000ff;\"\u003e\u003cstrong\u003eG54 Bass Clarinet Tone Hole Under cutters\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e make this undercutting a simple task.\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e1.\u003c\/strong\u003e\u003cspan\u003e Choose one of the \u003c\/span\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/www.ferreestoolsinc.com\/products\/g53-clarinet_tonehole_undercutters?variant=1107211172\" style=\"color: #0000ff;\"\u003e\u003cstrong\u003eG53\u003c\/strong\u003e \u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003eor \u003c\/span\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/www.ferreestoolsinc.com\/products\/g54-bass_clarinet_tonehole_undercutters?variant=1107024724\" style=\"color: #0000ff;\"\u003e\u003cstrong\u003eG54\u003c\/strong\u003e \u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003eUnder cutters that matches the tone hole you will be cutting.\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e2.\u003c\/strong\u003e\u003cspan\u003e Slide the keyed slot in the bottom of the cutter over the keyed part of the insertion rod.\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e3.\u003c\/strong\u003e\u003cspan\u003e Slide insertion rod (with the cutter resting on it) into the end of the clarinet joint. By looking thru the tone hole, stop the cutter directly under the hole you will be working on.\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e4.\u003c\/strong\u003e\u003cspan\u003e Insert the threaded T handle down thru the tone hole and screw it into the under cutter. \u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e5.\u003c\/strong\u003e\u003cspan\u003e Pull out the insertion rod from the clarinet joint.\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e6.\u003c\/strong\u003e\u003cspan\u003e After the hole has been undercut, return the insertion rod into the clarinet joint and insert the keyed end back into the key way in the under cutter. (Cont. top of next column) \u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e7.\u003c\/strong\u003e\u003cspan\u003e Now you can unscrew the T handle from the cutter and pull out the insertion rod out of the clarinet. The cutter will come out with the rod.\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e8. \u003c\/strong\u003e\u003cspan\u003eWhile holding the clarinet joint, pull up on the T handle and twist it clockwise. This will pull the undercutter against the inside of the tone hole. The clockwise turning will remove the material making a perfect tapered opening. It normally only requires a few turns of the handle (5 or 6). Not a lot of upward pressure is necessary. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e-A \u003c\/span\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/www.ferreestoolsinc.com\/products\/g53-clarinet_tonehole_undercutters?variant=1107211172\" style=\"color: #0000ff;\"\u003e\u003cstrong\u003eG53 Soprano Clarinet Undercutter set\u003c\/strong\u003e \u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003econsists of the 12\" insertion rod, three T handles, and six precision cutters. \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e-A \u003c\/span\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/www.ferreestoolsinc.com\/products\/g54-bass_clarinet_tonehole_undercutters?variant=1107024724\" style=\"color: #0000ff;\"\u003e\u003cstrong\u003eG54 Bass Clarinet Undercutter set\u003c\/strong\u003e \u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003econsists of the 36\" insertion rod, two T handles and seven precision cutters.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan\u003eAvailable:\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/www.ferreestoolsinc.com\/products\/g53-clarinet_tonehole_undercutters?variant=1107211172\" style=\"color: #0000ff;\"\u003e\u003cstrong\u003eG53 Clarinet Tone Hole Undercutter\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e (6 cutters)\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/www.ferreestoolsinc.com\/products\/g54-bass_clarinet_tonehole_undercutters?variant=1107024724\" style=\"color: #0000ff;\"\u003e\u003cstrong\u003eG54\u003c\/strong\u003e \u003cstrong\u003eBass Clarinet Tone Hole Undercutter\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e (7 cutters)\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/www.ferreestoolsinc.com\/products\/g54-bass_clarinet_tonehole_undercutters?variant=1107024724\" style=\"color: #0000ff;\"\u003e\u003cstrong\u003eG54A\u003c\/strong\u003e, \u003cstrong\u003eB\u003c\/strong\u003e \u003cstrong\u003eIndividual handles for G54\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/www.ferreestoolsinc.com\/products\/g54-bass_clarinet_tonehole_undercutters?variant=1107024724\" style=\"color: #0000ff;\"\u003e\u003cstrong\u003eG54C\u003c\/strong\u003e \u003cstrong\u003eInsertion Rod for G54\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/www.ferreestoolsinc.com\/products\/g55-insertion_rod_only_for_alto_clarinet?variant=1107211208\" style=\"color: #0000ff;\"\u003e\u003cstrong\u003eG55\u003c\/strong\u003e \u003cstrong\u003eInsertion Rod-Alto Clarinet\u003c\/strong\u003e\u003c\/a\u003e \u003c\/span\u003e\u003c\/p\u003e"}

G54 Bass Clarinet Tone Hole Undercutter (7 cutters)

Product Description

This tool was developed at the request of several Repairmen. These Repairmen had been getting requests to undercut the tone holes on bass and soprano clarinets. Accomplished players feel that this undercutting improves the tone, response and clarity of many of the notes on the clarinet.
  This tool accomplishes the undercutting that is already standard on many French manufactured clarinets. Now you can perform the procedure on any clarinet. Ferree's G53 Soprano Clarinet Tone Hole Under cutters and G54 Bass Clarinet Tone Hole Under cutters make this undercutting a simple task.
1. Choose one of the G53 or G54 Under cutters that matches the tone hole you will be cutting.
2. Slide the keyed slot in the bottom of the cutter over the keyed part of the insertion rod.
3. Slide insertion rod (with the cutter resting on it) into the end of the clarinet joint. By looking thru the tone hole, stop the cutter directly under the hole you will be working on.
4. Insert the threaded T handle down thru the tone hole and screw it into the under cutter.
5. Pull out the insertion rod from the clarinet joint.
6. After the hole has been undercut, return the insertion rod into the clarinet joint and insert the keyed end back into the key way in the under cutter. (Cont. top of next column)
7. Now you can unscrew the T handle from the cutter and pull out the insertion rod out of the clarinet. The cutter will come out with the rod.
8. While holding the clarinet joint, pull up on the T handle and twist it clockwise. This will pull the undercutter against the inside of the tone hole. The clockwise turning will remove the material making a perfect tapered opening. It normally only requires a few turns of the handle (5 or 6). Not a lot of upward pressure is necessary.

-A G53 Soprano Clarinet Undercutter set consists of the 12" insertion rod, three T handles, and six precision cutters.
-A G54 Bass Clarinet Undercutter set consists of the 36" insertion rod, two T handles and seven precision cutters.

Available:
G53 Clarinet Tone Hole Undercutter (6 cutters)
G54 Bass Clarinet Tone Hole Undercutter (7 cutters)
G54A, B Individual handles for G54
G54C Insertion Rod for G54
G55 Insertion Rod-Alto Clarinet 

Sku: G54
$ 362.45
Maximum quantity available reached.

Ferree's Tools Shipping Overview

  • We offer Free Shipping on all orders, ALL OVER THE WORLD!
  • We will ship your orders the most economical way. 
  • If you choose to pick your carrier, or next day shipping on your orders you WILL be charged the shipping cost.
  • Because of Federal Laws chemicals must ship via ground transportation.
  • Chemicals cannot be shipped overseas.
  • International Shipments, we cover the shipping cost only - we DO NOT cover the import duties/taxes charged by other countries, nor do we cover the extra carrier cost if imposed on the International shipment.
  • If you refuse to accept your order from the carrier for any reason and it is returned to us you will get a refund minus the return postage when it is received.  This apples to all domestic and International shipments.
  • If you refuse to accept your order from the carrier for any reason and it is not returned to us, you will not get a refund of your order.  This applies to all domestic and International shipments

Ferree's Tools Return Policy

Any return must have an RMA #.  Please contact the office to receive this number.

  • We appreciate your business and want you to be 100% satisfied.  If for any reason you need to return our products you must do so within 30 days in order to get a full refund.  Any return after 30 days is subject to a restocking fee determined by the amount of the order, condition of the item and age of the item being returned.
  • Returns are not accepted for any item after 180 days from the invoice date.
  • Returns are not accepted for any item that was manufactured per your instructions and are not our standard tools.
  • Any standard tool manufactured at Ferree’s is warranted to be free from defect for a period of 1 year.  We will at our discretion repair or replace your tool.  You must return the tool to Ferree’s for this warrant to be valid.

Ferree’s Tools
Helping the Instrument Repair Tech and Do it Yourselfers
for over 70 years.
Thank you for your continued support!

           

FERREE’S TOOLS INC
1477 E MICHIGAN AVENUE
BATTLE CREEK MICHIGAN 49014
TOLL FREE: 800-253-2261    PH:  269-965-0511   
FAX:   269-965-7719

WWW.FERREESTOOLSINC.COM

OFFICE HOURS 8:30-5:00 (EST)** PLANT HOURS 6:30-3:00 (EST)
FOR TECHNICAL ASSISTANCE DURING PLANT HOURS PLEASE CALL OR EMAIL CURTIS FERREE OR STEVE WILBUR
CURTIS@FERREESTOOLSINC.COM   269-224-6882
FERREESSHOP@OUTLOOK.COM   269-224-6877
 
OFFICE CONTACT INFORMATION
SALES   -   CELESTE WELLS
 
ACCTS RCV-CANDY RAY 
 CANDY@FERREESTOOLSINC.COM  269-224-6886
  
OFFICE MGR.-TAMI FERREE 
 TAMI@FERREESTOOLSINC.COM  269-224-6881
 
“ WE SELL ONLY THE BEST AND WE SELL TO EVERYONE”
 
ORDERING GUIDELINES
  • Phone orders are taken Monday through Friday 8:30am – 3:00pm Eastern Standard Time
  • Fax and email orders can be sent anytime and will be processed on the next business day. 
  • Web store orders are taken 24/7/365 and will be processed on the next business day. 
  • There is a $25.00 minimum for all orders.
  • Changes to orders after they are placed will be subject to a 15.00 handling fee.
  • Rush orders are accepted and will ship same day if placed before 11:00am or next day if placed after 11:00am (est).  Rush fees are listed below
               Order value                           Fee
                              Up to 100.00      $15.00
                              100.01-500.00   $20.00
                              Over 500.00        $25.00
 
PAYMENT OPTIONS
  • ALL orders must be paid for in advance of shipping unless you have established an account. 
  • Credit Card     
    •  Visa, MasterCard, Discover and American Express are  accepted.
  • PayPal             
    • Use your PayPal account to pay directly from your bank.  We can use this for net 30 customers as well.
  • Chk in Advance 
    • If you wish to pay by check we will email you an invoice for your order.  Your order will not ship until the payment has cleared the bank.  This could result in delayed shipping.
  • Open Accts        
    • All open accounts are subject to credit approval.  If you have not placed an order in over a year your account will be reviewed prior to shipping a new order.  Strict 30 day terms for all open accounts.  A 1.5% charge will be added to all past due balances.
 
 
PLEASE INCLUDE YOUR CUSTOMER I.D. ON ALL INQUIRIES, ORDERS, PAYMENTS AND RETURNS TO ENSURE PROPER PROCESSING.
 
 
 
 
PRICING INFORMATION
  • PLEASE VISIT THE WEBSITE FOR UP TO DATE PRICING
  • Prices are in U.S. Dollars and are subject to change without notice.
  • Discounts are listed on the web store for bulk purchases of certain items.
  • Quotes are valid for 30 days.  No exceptions.
 
SHIPPING
  • We offer Free Shipping on all orders, ALL OVER THE WORLD!
  • We will ship your orders the most economical way. 
  • If you choose to pick your carrier, or next day shipping on your orders you WILL be charged the shipping cost.
  • Because of Federal Laws chemicals must ship via ground transportation.
  • Chemicals cannot be shipped overseas.
  • International Shipments, we cover the shipping cost only - we DO NOT cover the import duties/taxes charged by other countries, nor do we cover the extra carrier cost if imposed on the International shipment.
  • If you refuse to accept your order from the carrier for any reason and it is returned to us you will get a refund minus the return postage when it is received.  This apples to all domestic and International shipments.
  • If you refuse to accept your order from the carrier for any reason and it is not returned to us, you will not get a refund of your order.  This applies to all domestic and International shipments
 
RETURN POLICY
Any return must have an RMA #.  Please contact the office to receive this number.
  • We appreciate your business and want you to be 100% satisfied.  If for any reason you need to return our products you must do so within 30 days in order to get a full refund.  Any return after 30 days is subject to a restocking fee determined by the amount of the order, condition of the item and age of the item being returned.
  • Returns are not accepted for any item after 180 days from the invoice date.
  • Returns are not accepted for any item that was manufactured per your instructions and are not our standard tools.
  • Any standard tool manufactured at Ferree’s is warranted to be free from defect for a period of 1 year.  We will at our discretion repair or replace your tool.  You must return the tool to Ferree’s for this warrant to be valid.
  • If you refuse to accept your order from the carrier for any reason and it is returned to us you will get a refund minus the return postage when it is received.  This apples to all domestic and International shipments.
  • If you refuse to accept your order from the carrier for any reason and it is not returned to us, you will not get a refund of your order.  This applies to all domestic and International shipments
 
THANK YOU FOR CHOOSING FERREE’S

Related Products