Newest Products
N57AGL Barrel Type Dent Balls sizes .760" thru 1.0"
N57 Barrel Type Dent Ball Sets N57G, 101 steel dent balls and 5 brass drivers. Graduated in size from .250" (6.4mm) thru .750" (19mm) in .005" (.127mm) steps. Includes storage...
N57C Case only for Ball sets
N57CG Case only for Ball sets - WHOLE SIZES N57CH Case only for Balls - HALF SIZES N57CGL Case only for balls - over .750" diameter N57CD Double Case (two...
N57D Set of 5 Drivers
N57 Barrel Type Dent Ball Sets N57G, 101 steel dent balls and 5 brass drivers. Graduated in size from .250" (6.4mm) thru .750" (19mm) in .005" (.127mm) steps. Includes storage...
N57F DENT BALLS FOR FLUGELHORN .7525-.9675 INDIVIDUAL
These balls are from .7525 to 1.185" larger balls to use with any cable tool. YOU BUY INDIVIDUAL SIZES FROM .7525-.9675 ON THIS PAGE 174 sizes in this range stepped...
N57F DENT BALLS FOR FLUGELHORN .9700-1.185 INDIVIDUAL
These balls are from .7525 to 1.185" larger balls to use with any cable tool. YOU BUY INDIVIDUAL SIZES FROM .9700-1.185 ON THIS PAGE 174 sizes in this range stepped...
N57F DENT BALLS FOR FLUGLEHORN - Sets
These balls are from .7525 to 1.185" larger balls to use with any cable tool. YOU BUY SETS ON THIS PAGE 174 sizes in this range stepped .0025 increments Sold...
N57G 101pc Dent Ball Set
N57G, 101 steel dent balls and 5 brass drivers. Graduated in size from .250" (6.4mm) thru .750" (19mm) in .005" (.127mm) steps. Includes storage case. Drilled to accept most of...
N57GDBL 202pc Dent Ball Set in double case
N57 Barrel Type Dent Ball Sets The N57GDBL, 202 Dent Balls in double case combine both the N57G and N57GH. These barrel shaped dent balls are ground and sanded to...
N57GH 101pc Dent Ball Set in 1/2 sizes
N57GH, 101 steel dent balls and 5 brass drivers. Graduated in size from .24750" thru .74750" in .0025" steps. Includes storage case. Drilled to accept most of our cable tools,...
N57X Set of 4 dent balls, ground finish .755, .760, .765, .770
N57 Barrel Type Dent Ball SetsN57G, 101 steel dent balls and 5 brass drivers. Graduated in size from .250" (6.4mm) thru .750" (19mm) in .005" (.127mm) steps. Includes storage case....
N58 GROUND CASING MANDREL SET
6 OR 10 PC SET OF N58 GROUND CASING MANDREL AT A HUGE SAVINGS OVER INDIVIDUAL PRICES ** Put the sizes you want in the note section of your order...
N58A Ground Casing Mandrel .631-.700"
These are solid steel mandrels used to remove dents from valve casings and to straighten casings if they are sprung. Easier, faster and more safe to use than reamers and...
N58C Ground Casing Mandrel .701-.885"
These are solid steel mandrels used to remove dents from valve casings and to straighten casings if they are sprung. Easier, faster and more safe to use than reamers and...
N58D Ground Casing Mandrel .886-1.400"
These are solid steel mandrels used to remove dents from valve casings and to straighten casings if they are sprung. Easier, faster and more safe to use than reamers and...
N60 Sax Post Raising Tools
When a sax post is depressed into the sax body causing misalignment and key binding, it can be raised quickly to its proper position with the N60 Sax Post Raising...
N61 Sax Body Straightening Tool
This Sax Body Set is especially for straightening saxes which are slightly bent or sprung, usually causing upper stack keys to bind and /or not work properly. Always straighten before...
N62A Larger Barrel Type Dent Balls
The larger sets listed below greatly increase your work range. The regular sets increase in .025 (.635mm) steps. The half size sets allow for much finer work if used with...
N62B Larger Barrel Type Dent Balls(Half Sizes)
The larger sets listed below greatly increase your work range. The regular sets increase in .025 (.635mm) steps. The half size sets allow for much finer work if used with...