Newest Products
G18 Automatic Center Punch
Mark hole centers, while keeping one hand free. Spring inside helps strike the blow. Striking force is adjustable. G18 Automatic Center Punch G18A Extra Point
G21 Set of 7 Key Leveling Tools
This set of 7 brass wedges are placed under sax pads to align cups with tone holes before pad seating. Each wedge is a different thickness and different angle for...
G23 Bench Oiler
Durable 2oz (59ml) polyethylene (squeeze type) bottle with 1" (25.4mm) long, .025" (.64mm) hypodermic needle. Ideal for all fine oiling. Dust proof cap protects the needle when not in use.
G25 Digital Calipers
This digital caliper’s stainless steel construction allows you to get metric or SAE decimal readings even in harsh conditions. The easy-to-read digital display allows you to measure and convert from...
G26 Flute Pad Seating Clips
The G26 Flute Seating Clips are smaller than the G82 Flute Clips and good for playing condition jobs. The clips are vinyl covered to prevent them from scratching the instrument...
G3 Section Box
Heavy duty plastic yellow storage boxes. Much stronger than the typical variety store type. Convenient and easy to handle. Keeps pads or parts clean and easy to find. Tight fitting...
G30 Slide Spacing Tool (Set of Two)
G30 Slide Spacing Tool is available as a set of two. We have the simple method to get correct alignment of trombone slides during reassembly. Faster and far more accurate...
G32 Slide Removal Collars for tenor Trombone
The Trombone Slide Remover Collars are now made with two size openings. The G32A set is .600" (15.2mm) to fit regular trombones and the G32B is .656" (16.7mm) for...
G35 Trombone Cork Barrel Spacer Tools, Set of 3
This is a set of 3 brass wedges for aligning the inner slide of a trombone with the cork barrel. Each of the 3 sections has identical scribed reference...
G37 Rubber Wedges
For Repairmen who prefer rubber seating wedges. Available in three sizes and sold in dozens or hundreds. Available in 3 sizes: G37A Small Rubber Wedges .562" (14.28mm) x .200"...
G38 Small Wood Wedges
Wood WedgesAvailable in two sizes these wood wedges are used to slip under key feet when needed. G38A Small Wood Wedges 1-1/4 x 1/4 (31.8 x 6.4mm) G38B Large Wood...
G39 Valve Guide Fitting Tool
This tool is scientifically shaped, drilled and tapped to hold valve guides and stars for valve instruments. When the guide is fitted, remove it from the tool and install it...
G40 Slide Solder Rod
This G40 Slide Solder Rod is properly tapered for soldering into all stuck slides on cornets, trumpets, mellophones and other small tube instruments after removing crooks. Warm the slide so...
G40A-G40E Hollow Tip Solder Plug
These plugs are properly tapered for soldering into all stuck slides on small instruments after removing crooks. Holes allow for faster heat dispersal along with EASY removal of stuck slide...
G41 Trombone Bumper Removers
The G41 Trombone Bumper Remover is available in 2 Sizes. Easiest possible method for removing stuck cork and felt bumpers from the cork barrel. Our Trombone Bumper Removers specifically designed...
G42 Adjustment Screw Drilling Jig
This newly designed tool allows you to convert the adjustment screws of any instrument and obtain the same results. No more adjustment screws chewing through to the key foot, material...
G43 Soldering Jig
Ferree's Soldering Jig is a high strength, industrial quality, heavy duty soldering jig. It features full steel construction for durability and rigidity. Parallel type, screw set jaws. Arms are 100%...
G44 Screw Slot Sawing Tool
The Screw Slot Sawing Tool accurately saws screwdriver slots in stack and hinge screws. Takes all necessary rod sizes. The steel shaft is 3/8" (9.5mm) to fit the chuck...
G45 Cork Barrel Dent Remover
A really great time saver! No longer is it necessary to remove trombone slide rails to take dents out of the cork barrel. Also, this tool can be used to...
G50 Bassoon Tenon Tool
G50-G51-G52 Bassoon Tenon Tools These tools work similarly to the G84 Clarinet Tenon Tool, except that they have tapered pilots instead of cylindrical pilots. G50 To replace the tenon on...