Newest Products
G51 Bassoon Tenon Tool
G50-G51-G52 Bassoon Tenon ToolsThese tools work similarly to the G84 Clarinet Tenon Tool, except that they have tapered pilots instead of cylindrical pilots.G50 To replace the tenon on bassoon tenor...
G52 Bassoon Tenon Tool
G50-G51-G52 Bassoon Tenon ToolsThese tools work similarly to the G84 Clarinet Tenon Tool, except that they have tapered pilots instead of cylindrical pilots. G50 To replace the tenon on bassoon...
G53 Clarinet Tone Hole Undercutter (6 cutters)
This tool was developed at the request of several Repairmen. These Repairmen had been getting requests to undercut the tone holes on bass and soprano clarinets. Accomplished players feel...
G54 Bass Clarinet Tone Hole Undercutter (7 cutters)
This tool was developed at the request of several Repairmen. These Repairmen had been getting requests to undercut the tone holes on bass and soprano clarinets. Accomplished players feel that...
G55 Insertion Rod-Alto Clarinet
This tool was developed at the request of several Repairmen. These Repairmen had been getting requests to undercut the tone holes on bass and soprano clarinets. Accomplished players feel that...
G56 Clarinet Bore Measuring Tool
Clarinet manufacturers spend thousands of dollars to perfect the inside boring of a clarinet joint to make it absolutely smooth. However, when we measured the inside diameter of hundreds...
G60 Adjustable Jewelers Saw Frame
Adjustable Jewelers Saw Frame. The finish is polished. Blade length is 5" (127mm) overall length is 11-12" (292mm). Blade is NOT included, see below. Also Available: D27 Jewelers Saw blades,...
G61 Orange Flake Shellac, 1lb (454gr)
One pound bags of flake shellac. Best grade available. Can be dissolved in alcohol or melted into sticks. 1lb (454gr)
G62 Metal Back Saw
All-purpose saw cuts copper, brass, plastic and wood leaving smooth edges. 6-1/2" blade, 32tpi, .010" thick, 1-3/16" cutting depth. Blade is non-replaceable. Cuts on pull stroke.
G63 Hacksaw Frames and Blades
G63 is a good quality metal hacksaw with a adjustable frame. BladesBlades sold each or Box of 10G63A 18 teeth per inch (7 teeth per 10 mm)G63B 24 teeth per inch...
G66 Lower Tenon Plug Holder
This slotted collet type holder secures lower joint tenon plugs tightly in the lathe chuck while the reaming operation is completed. An inexpensive answer to a common problem.
G68 SHELLAC
G68 SHELLAC AVAILABLE IN 5 COLORS AND AN ASSORTMENT (1 STICK OF EACH) SOLD BY EACH or DOZEN (sticks are 7" long and 1/2" wide) CLEAR- A truly crystal clear...
G69 French Cement
Used for floating in clarinet and oboe pads with flat backs. Heavy body with low temperature melting. This product is very brittle. We do our best, when shipping, to prevent...
G7 Scriber with Magnet
This scriber has a tungsten carbide tip, with a permanent magnet on the other end. The point reverses for safety. Can be used to touch up engraving or mark identifying...
G70 Clarinet Barrel Centering Tool
Holds and centers clarinet barrels in a lathe chuck when re-cutting the ring groove after shortening the barrel. Used to make new barrels.
G71 Bell Tenon Sets for Clarinets
The taper of the arbor fits clarinet bores better and acts as a pilot; making a more accurate cut with less chance of the cutter drifting off center. The cutter...
G72 Replacement Upper Tenons For Clarinets
Replacement Upper Tenons For Soprano Clarinets G72A ABS plastic tenon plug G72B Grenadilla tenon plug For Alto Clarinets G72C ABS plastic tenon plug G72D Grenadilla tenon plug For Bass Clarinets...
G73 Replacement Lower Tenons for Soprano Clarinets
For Bb Soprano ClarinetsG73A ABS plastic tenon plugG73B Grenadilla tenon plug For Eb Soprano ClarinetsG73C ABS plastic tenon plugG73D Grenadilla tenon plug G73S SET OF 4 LOWER TENONS
G74 Clarinet Raised Tone Hole Jig
This handy tone hole jig holds joints in the drill press while drilling out broken or chipped, raised and regular tone holes. When the jig is clamped securely to the...
G75 Black Delrin
Black delrin solid rods. The three smallest sizes are available in both 6" (15.2cm) and 12" (30.5cm). The larger sizes are available only in 12" (30.5cm) lengths. YOU CANNOT GLUE...