Newest Products
E36 Flute Grommet and Booster Pliers
The E36 Flute Pad Grommet Ring Pliers are very useful when working on French style open hole FFlutes. 5-1/4 (133mm) long. These precision made pliers are used to remove the...
E38 Triangular Scaper
Triangular Scrapers are used for scraping and cleaning solder from inside of tubing, for trimming tight tenon joints and many other general uses, including use as a fine lathe cut-off...
E4 Spring Punching/Removal Pliers
Remove broken springs from posts on all reed instruments. Saves hours in overhauls when necessary to remove stuck and rusted springs. No longer necessary to use a punch and a...
E40 Hollowed sides, straight edges
Triangular Scrapers are used for scraping and cleaning solder from inside of tubing, for trimming tight tenon joints and many other general uses, including use as a fine lathe cutoff...
E41 Flat Spring Hole Punch
An ideal way to punch holes in flat springs. Used primarily for punching an extra hole in flat springs where there are two screws, as in bassoons and some flutes....
E42 Sax Pad Slicks
These pad slicks are NOT meant to bend keys, but to protect the pads from the tone hole edge AFTER the leveling is done and before the seating. *Only .020...
E43 SAX KEY CLAMP
Used to seat sax pads with no need to compress sax key corks. Fast and easy, like flute clamps at providing pressure on each key. Three variations including a light...
E45 Solder Clip
Soldering Clips These stainless steel solder clips will not rust and do not corrode as easily from the heat and flux. Hold braces and flanges while silver soldering. Hold nibs...
E46 Small Sliding Caliper
Small Sliding Caliper (Vernier Gauge), marked in inches and millimeters. Handy for a multitude of jobs, including measuring pads and tenon joints.
E47 Set of Three Pivot Screw Key Reamers
Set of THREE pivot screw key reamers provide a wider size range. Better cutting angle. E47 Set of Three Pivot Screw Key Reamers E47H Set of Three Pivot Screw Key Reamers...
E49-E50-E51-E52 Steel Tweezers
Tweezers Available: E49 Plain steel, soldering tweezers, inexpensive, 6 (152mm) E50 Slide lock tweezers blunt smooth tips, nickel plated 6-1/2 (165mm). Holds parts snugly. E51 Light, medium sharp point, made...
E5 Spring Removing Plier
This plier will remove whole springs without breaking them when overhauling a reed instrument. Designed with tremendous leverage for better gripping power.
E53-E54 Register and Octave Tube Removers
E53 Register and E54 Octave Tube Removers Used to remove octave tubes before polishing the bore. E53 Clarinet Register Remover E54 Oboe Octave Tube Remover
E55 Thumb Tube Remover
This thumb tube remover tool is designed to remove and install threaded or pressed in tubes on many soprano clarinets. It will not scratch or mar the inside of the...
E56 Wax Spoon
Special wax spoon made of copper to hold heat. Used to place wax around reeds.
E57A Small Post Body Countersink
Makes a flat seat when replacing post in graft or replacing with larger threads. Knurled for hand operation. Also adjusts seats so posts can be lined up. E57A: .226 D...
E58 Sax Key Swedging Dies
E58 Sax Key Swedging Dies Usually used on top stack C, bis Bb, bottom stack F# and old style middle finger fork Eb mechanism lever. Available: E58A Small E58B Regular
E59 Pearl Protector
Used to place over the pearl while heating sax pads. Prevents scorching of pearls
E60 Crack Slick Spatula
A brass iron, flat on one side, curved on the other. Used for smoothing Shellac into woodwind cracks or other spreading uses.