Newest Products
E61 Flute Gauge
Special gauge for adjusting flute pad cup openings and for leveling. The small step is for trills and the upper C# key. The middle step is for mainline keys on...
E67 Post Locking Screw Countersink
The E67 Post Locking Screw Countersink is used to drill and countersink the proper size hole when installing a post locking screw. The countersink duplicates the taper on the bottom...
E68 Post Body 5.8mm Countersink and Drill
E68 (5.8mm) & E69 (6.5mm) POST BODY COUNTERSINKS These two post body countersinks and thread pilot drills are used to countersink the post flange into the instrument body after a...
E69 Post Body 6.5mm Countersink and Drill
E69 (6.5mm) & E68 (5.8mm) POST BODY COUNTERSINKS These two post body countersinks and thread pilot drills are used to countersink the post flange into the instrument body after a...
E7 Tapered Spindles
E7 Tapered Spindles Mount on motor shaft for scratch brush or small buffs. Fit over motor shaft affixed by set screw. Comes in two sizes, in both right and left...
E70 Cork Protector
Used to place over the end of a sax neck during the installation of a neck cork using shellac. Will prevent burning of the cork while heating the tube.
E71 Key Filing Clamp
Preferred by some technicians to hold parts during filing, polishing or general work. Made of hard wood with two leather lined jaws...one round and one square. When the tapered wedge...
E8 & E8A Saxophone Neck Holder
E8 Saxophone Neck Holder Two expandable mandrels to spin a sax neck in a lathe while sanding corks. Do not use in a Bench Motor. Insert in lathe chuck or...
E81-E85 Tone Hole Pad Seat Files
Perfectly ground, razor sharp edges, negative rake to prevent gouging. Use to remove small chips from tone holes of wood, rubber and plastic clarinets. E81 1/4 (6.4mm) Tone Hole Pad...
E87 Mini Tone Hole File
E87 Mini Tone Hole File (Especially for piccolo) E87A 1/4 (6.4mm) Mini Tone Hole File E87B 3/8 (9.5mm) Mini Tone Hole File E87C 17/32 (13.5mm) Mini Tone Hole File
E9 Large Flute Pad Ironing Tool
The E9 Flute Pad Ironing Tool is made of tempered stainless steel. It has two center holes of different diameters, both larger than our E34 Flute Pad Ironing Tool. Used...
E97 Rotary Tone Hole Refacing Set
These NEW E97 Diamond and brass refacing tools are now available in two different grits; the standard 400 and fine 800, for both cutting and deburring depending on your need....
E97D 400 & 800 grit Round Diamond Disc
These NEW E97 Diamond and brass refacing tools are now available in two different grits; the standard 400 and fine 800, for both cutting and deburring depending on your need....
E97P-1 thru 9 Individual Pilots
These NEW E97 Diamond and brass refacing tools are now available in two different grits; the standard 400 and fine 800, for both cutting and deburring depending on your need....
E97R Brass Rounds
These NEW E97 Diamond and brass refacing tools are now available in two different grits; the standard 400 and fine 800, for both cutting and deburring depending on your need....
E97W Universal Wrench
These NEW E97 Diamond and brass refacing tools are now available in two different grits; the standard 400 and fine 800, for both cutting and deburring depending on your need....
E98 Flute Tone Hole Refacing Tool Set
This flute specific tool is a refined version of the hexagonal one we have had for saxophones since the late 1980's. The new, longer, round and knurled aluminum handle gives...
E99A Adjustable Eldred Spell Widget
E99A ELDRED SPELL WIDGET This useful tool was developed over...
EB3 Erick Brand Repair Manual
The well-known Erick Brand Repair Manual, considered by some as the Bible of the industry. Everything you need to know about repairing band instruments including recommended tools. This manual has...