Featured Items

P60 Rotary Valve Bearing Tool


Pictured left to right is the handle, #5, #6, #7, #0, #1, #2, #3 and body.


    Your favorite P60 Rotary Valve Bearing Tool now has optional metric sized collets. These new collet sizes are 5mm, 6mm and 7mm and are numbered accordingly.  Now we can use it to swedge loose hinge tubes on tuba and French horn lever keys, as well as some bassoons and larger saxophones.  This tool is also used to shrink and/or repair French style open tone hole flute grommets.  Collets can shrink approximately .030" from stated size.


Collet Part


Item Part#

Size Note:















Std.   8.0mm (.316")

Std.   8.7mm (.343")

Std.   9.3mm (.368")

Std.  10.0mm (.390")

Opt.   5.0mm (.197")

Opt.   6.0mm (.236")

Opt.   7.0mm (.276")



P60 Rotor Bearing Tool with 4 standard collets $179.50 +s/h
Any individual collet, (Standard or Optional) $37.50 +s/h
P60B Replacement Body & Handle Assembly $52.50 +s/h
 P60W Swedging Tool for Large Woodwind with 3 Collets (#5, #6 & #7) $149.50 +s/h



P61 Rotor Bearing Plate Expanding Tool


    Super tool for tightening loose bearing plates in worn rotor valves.  Quickly tightens bearing plates, expanding their diameter by “swedging” them while they spin in this handy fixture that is mounted in your Z120 lathe or even your N99 bench motor.  The roller makes easy work of this old problem.

    The tapered head of the retaining screw will center the bearing on the housing.  Keep it snug but do not over tighten.  While keeping the roller straight with the housing, apply some pressure as the housing spins and it will expand the outer edge.

    Then check and see how the fit is commencing (you can use dial calipers or another precision measuring device). You may have to make several attempts so don't try to finish the job all at once. You can "dial in" on the fit and do a great job, so proceed slowly.  As always, use with commonly accepted industrial safety procedures.


The P61 is only $77.50 complete