Newest Products
D109 Die Stock
This 13/16" (20.6mm) die stock is designed to accommodate D210 dies and D120D metric dies up to 4mm. and the 1" (25.4mm) holds 5mm and up. D109 Die Stock 13/16"...
D110A & B Screw Extractor
Will remove most instrument screws that are .125 (3.15mm) in diameter or larger. Drill a #51 drill size hole into the center of the screw. Use a larger drill bit...
D113A Concave Pearl Finger Buttons
REAL MOTHER OF PEARL - NOT PLASTIC! Pearls for finger buttons. Will fit D116 pearl holders. Use H34 dies to install. D113A Concave Pearls Sizes: 9.1, 10.8, 13.7, 14.8mm Also...
D113B Convex Pearl Finger Buttons
REAL MOTHER OF PEARL - NOT PLASTIC! Pearls for finger buttons. Will fit D116 pearl holders. Use H34 dies to install. D113B Convex Pearls for thumb buttonsSizes: 13.2, 14.8 , 15.3,...
D116A Pearl Holders Finger Pearls
Brass holders to fit D113 pearls. Separately sized die must be used for each size pearl holder. Use H34 dies to install. D116A For finger pearls Sizes: 9.1, 10.8, 13.7,...
D116B Pearl Holders Thumb Pearls
Brass holders to fit D113 pearls. Separately sized die must be used for each size pearl holder. Use H34 dies to install. D116B For thumb pearls Sizes: 13.2, 15.3, 16.5mm...
D12 Cork Strip Cutting Gauge
Stainless steel cutting gauges for tenon corks. The stepped notches on both ends are used for measuring the width of the cork groove. The other side is a straight edge....
D120 Metric Individual Taps and Dies
TAP SIZE D120T Woodwind 1.6-.35 1.7-.35 2.0-.25 2.0-.40 2.2-.45 2.5-.45 3.0-.50 Brasswind 3.0-.60 3.5-.60 4.0-.70 4.0-.75 5.0-.80 6.0-1.00 8.0-1.25 D120D DIE SIZE Woodwind 1.6-.35 1.7-.35 2.0-.25 2.0-.40 2.2-.45 2.5-.45 3.0-.50...
D120A and D120B Metric Tap & Die Sets
Tap Size Die Size D120T D120D Woodwind Brasswind Woodwind Brasswind 1.6-.35 3.0-.60 1.6-.35 3.0-.60 1.7-.35 3.5-.60 1.7-.35 3.5-.60 2.0-.25 4.0-.70 2.0-.25 4.0-.70 2.0-.40 4.0-.75 2.0-.40 4.0-.75...
D13 Sax Pad Cup Height Gauge, Set
The D13 Sax Pad Opening Height Gauge is a set of millimeter gauges used to determine the height of saxophone pad cups. 2mm thru 12mm in one millimeter steps. Flat...
D14 Sax Neck Screw Extractor
The D14 Sax Neck Screw Extractor is used to remove the remaining threaded shaft of a broken sax neck screw from the screw holder socket. Simply press teeth against the...
D15 Pivot Screw Countersinks W/Handles
New design Pivot Screw Countersink. We now have many more sizes to fit the multiplying screw head diameters, precisely. All are assembled with smooth, finished wood handles for precision metal...
D2 Cork Knife with extra blades
Precision Knife features a safety cap, solid aluminum handle and one of the sharpest and most durable blades. The gold hue on the cutting edge is a zirconium nitride coating...
D20 Solid Hinge Tube Shortener
Used for the same purpose as tubular hinge tube shorteners, except these are for solid hinge tubes. D20 Small Solid Hinge Tube Shortener D20H Shortener with handle
D200 TAPS - Individual Sizes
TAPS(DOMESTIC THREADS) We have all sizes of taps available for most musical instruments.
D200D Domestic Tap & Die Set
Tap and Die Set Complete set of domestic thread taps and dies in a Plastic Box. D200D Set of Taps and Dies (NO DRILLS)
D21 Solid Hinge Tube Shortener
Used for the same purpose as tubular hinge tube shorteners, except these are for solid hinge tubes. D21 Large Solid Hinge Tube Shortener D21H Shortener with handle
D210 DIES - Individual Sizes
DIES(DOMESTIC THREADS) We have all sizes of dies available for most musical instruments. Dies have 13/16" (20.6mm) outside diameter.
D22 Bench Motor Adaptor For N99
These Adaptors are inserted into the chuck of the N99 Bench Motor. The adaptor will hold the E7 Tapered Spindles. D22 for 3/8 to increase to 1/2" use E7AL...