Newest Products
Z60-4 Long Round Tube
This 4 1/4" long by 2 3/8" diameter steel tube is also included standard with the Z60 Dent Machine. Great for times where you need a nice large round steel...
Z60-40 Adjustable Strut
The stability strut was made to stiffen the frame, NOT normally required; unless you are using the Z60-22 Dent Rod, Z60-50 Tone Hole Body Burnishing Set or old hard sousaphones.
Z60-50 Tone Hole Body Burnishing Set
Already nicknamed the finger tool by our customers, the Z60-50 is a sax (and flute) tone hole and bore tool. New in 2007 was this great Old School method for...
Z60-50FP Tone Hole Body Burnishing Pin
Originally developed for The Z60-50 Burnishing Set (aka the finger tool) that fit into the supplied adapter for the pressure wheel quill. This tool allows you to remove dents from...
Z60-51 Flute Body Roller
Introducing the Z60-51 Flute Body RollerSimilar to the P1 Precision Flute Roller (but without the handle), this Flute body roller was developed for the Z60-9A Curved Arm used on the...
Z60-5A Large Ball
This 1 3/4" X 1 3/4" barrel shaped dent ball comes standard in the Z60 Ferree's Dent Machine package. This can also be used with our new N74A XL Dent...
Z60-6 and Z60-6A Dent Machine Saxophone Shoe
The Z60-6 used for Saxophone bell repair. ...
Z60-8 Bolt For Locking Forked Arm
The Z60 is a very forgiving unit and will allow you to be a little off without causing a major problem. The keys to its longevity are that it was...
Z60-9A Curved Arm
Accessory for the Z60-2 Dent Machine quill. The Z60 is a very forgiving unit and will allow you to be a little off without causing a major problem. The keys...
Z60-9B Straight Roller
Included with the Z60. Picture shows roller (z60-9b) as used with the z60-9a
Z60M Mini Z Extention for Baritone
EXTENTION MADE FOR THE MINI Z THAT ENABLES YOU TO WORK ON BARITONE SAXOPHONES. ...
Z60M MINI-Z Vise Mounted Dent Machine
This mini version of our Z60 Dent Machine is more compact for easy storage, maneuverability and transportability. When needed, just pull it off the wall and attach it to...
Z60MSS Mini-Z Vise Mounted Dent Machine Starter Package
Mini Z Dent Machine Starter Package, comes with the following accessories: Z60M Mini Z Vise Mounted Dent Machine Z60-12 Tapered Trumpet Mandrel Z60-13 Tapered Cornet Mandrel Z60-15 Tapered Trombone Mandrel...
Z60P Ferree's Dent Machine - No Tooling in This Package
**NEW PACKAGE Z60P (Z60 WITH NO TOOLING) INCLUDES Z60-1, Z60-2, Z60-9A AND Z60-14 The Z60 Dent Machine pictured here, which has been in production for over 45 years. The Z60...
Z60PS Ferree's Dent Machine and Stand- No Tooling in This Package
**NEW PACKAGE Z60PS TOP AND BASE WITH NO TOOLING When you order this package, it contains part numbers Z60-1, Z60-2, Z60-9A AND Z60-14, Z61-7, Z61-8, Z61-5 AND Z61-6
Z60S Bench Mount Stand
Now, you can use your Z60 right off your existing heavy bench. This stand is made of heavy duty construction and its offset so that you can use the safety...
Z60TOTAL Dent Machine and Every Attachment
THIS IS THE ULTIMATE PACKAGE. THE Z60 WITH BASE AND EVERY ATTACHMENT AVAILABLE. The footprint of this top 30 x 6 x 20 The footprint of the base is 27...
Z61 Base
The Z60 dent machine is the top portion of a complete dent machine. There are two bottoms; one for sousaphone work (Z61) and the other for tuba work (Z61E). These...
Z61-1 Curved Sousa Rod
The Z61 is outfitted with 3 steel rods that areintended to do sousaphone branches. The Z61E isoutfitted with the new Z61-11 adjustable rod to dotuba bottom bows. It is necessary,...