Newest Products
X57 X57A POLISHING CLOTHS
NOW AVAILABLE IN TWO SIZES X57 10 X 10 X57A 14 x 14 High quality cleaning/polishing cloth suitable for delicate surfaces. Made of woven, unbleached...
X70 Ferree's Clear Lacquer
An excellent quality cellulose lacquer. The same lacquer used by many band instrument manufacturers on instruments too large to use bake -on type epoxy lacquer. Excellent color retention, better perspiration...
X72 Ferree's Retarder
To be used when the humidity is within 50% to 90% (if higher, wait until another day to lacquer). This retarder will slow the drying action to prevent blushing (whitening)...
X80-X83 Ferree's Perma-Laq (Epoxy Type Lacquer)
Ferree's Perma-Laq is an epoxy modified lacquer developed for use where chemical and abrasion resistance as well as clearness are primary requirements. This is the same lacquer used by many...
Z10 Cold Cleaner
NOT a degreaser, but, it is a VERY GOOD cold cleaner. It is useful for wiping valves, casings, and trombone hand slide after they have been cleaned with F7 Premiere...
Z100-Z105 Floor Mount Buffers
** THESE WILL TAKE THREE WEEKS TO BUILD AND SHIP VIA COMMON CARRIER ** Ferree's heavy duty floor model buffers are designed with a 1/4 (6.4mm) steel housing for...
Z115 1" Wide Sanding Belts
Belts for Z110 thru Z113 Wall Mounted Belt Sanders Z115A -220 Z115B -320 Z115C -400 Grits
Z116 2" Wide Sanding Belts
Belts for Z111 thru Z113 Wall Mounted Belt Sanders Z116A -220 Z116B -320 Z116C -400 Grits
Z15 Lacquer Remover and Silver Cleaning Solution
This product will effectively remove most cellulose lacquer. Just mix 1/2 lbs. (.226 kg) per 1 gallon (3.79 L) of water. Use at 180° to 210° F (82.2° to 98.9°...
Z19 Lime and Scale Remover
This lime and scale remover was designed to be used in lime and scale removal. Deposits are removed rapidly and effectively with a minimal attack on brass, copper, aluminum, etc......
Z22 Lacquer Stripping Solution
** WE ARE OUT OF STOCK ** This item will no longer be available after stock is gone. Current EPA restrictions/requirements regarding the chemicals in this product make it difficult...
Z25 Tarnish Remover
Cleans flute bodies like magic. This Tarnish Remover is the best silver cleaning agent on the market today. It can penetrate and clean the darkest tarnish off all silver plated...
Z27 Plastic Flute Tray
This deep tray will accommodate most flute bodies and parts for dipping in Z25 Tarnish Remover. It measures 15" X 6" X 2" (381mm x 76mm x 50.8mm).
Z35 Portable Air Buffer
This portable air operated buffer is handy for cutting down make ready time on brass overhauls. It has a special spindle for small buffs for those hard-to-reach solder spots and...
Z51 Buffing Hood
Our Z51A Buffing Hood is made from heavy, galvanized steel and has an adjustable wheel opening. It can be set on your base or on the Z51B Folding Bracket. By...
Z52 4" (102mm) Flexible Tubing
Used with our Z51A Buffing Hoods and dust collectors. Sold By The Foot Also Available:Z51A Buffing Hood OnlyZ51BS 11-1/2" Bracket for wall mounted bufferZ51BL 17-1/2" Bracket for floor mounted bufferZ54...
Z54 6" Y Dust Hose Connector
6" (152mm) Y tube, two 4" (102mm) inlets Also Available:Z51A Buffing Hood OnlyZ51BS 11-1/2 Bracket for wall mounted bufferZ51BL 17-1/2 Bracket for floor mounted bufferZ52 4" (102mm) Flexible Tubing
Z55 Buffing Wheel Spacers
The Z55 Buffing Wheel Spacers are used to position the buffs near the end of the threaded shaft so the Z56 Flanged Nut will screw on and still cover the...
Z56 Safety Flange Nuts
Z56 SafetyFlange Nuts are used to replace hex and acorn nuts on buffing machine shafts. The flanged design provides OSHA safety for the operator. They are used with the Z55...