{"id":4183978344495,"title":"N80A Ball Type Dent Balls","handle":"n80a-ball-type-dent-ball","description":"\u003cp\u003eSet of 3 balls (10-24 thread) that can be used on the \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"http:\/\/www.ferreestoolsinc.com\/products\/n54_knuckle_dent_rods?variant=1166541004\" target=\"_blank\" style=\"color: #0000ff;\" rel=\"noopener noreferrer\"\u003e\u003cstrong\u003eN54 Knuckle Tools\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e, the \u003cstrong\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"http:\/\/www.ferreestoolsinc.com\/products\/n68_right_angle_mandrel?variant=1166541104\" target=\"_blank\" style=\"color: #0000ff;\" rel=\"noopener noreferrer\"\u003eN68 Right Angle Mandrel\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e and the \u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.ferreestoolsinc.com\/products\/n91_tapered_mandrels?variant=1045255732\" style=\"color: #0000ff;\"\u003eN91B Tapered Mandrel\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e. These dent balls are designed spherically, so there is no possibility of making lateral ridges in the tubing. Made of chrome steel with a satin sandblast finish. This finish has minute pores which hold Vaseline (or any other lubricant) longer for easy use in tubing.\u003cbr\u003e \u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003e~REPAIR TIP~\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e Better Dent Work Using Your Dent Hammer\u003cbr\u003e Normally, you would use round balls (N80D or N80E) screwed on 5\/8 or 3\/4 rods like \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/www.ferreestoolsinc.com\/products\/n31_dent_rod?variant=1166540836\" style=\"color: #0000ff;\"\u003e\u003cstrong\u003eN31\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e or a \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/www.ferreestoolsinc.com\/products\/n74-straight_dent_rod?variant=1166541132\" style=\"color: #0000ff;\"\u003e\u003cstrong\u003eN74\u003c\/strong\u003e \u003c\/a\u003e\u003c\/span\u003emounted in a vise with a \u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.ferreestoolsinc.com\/products\/l14_v-blocks?variant=1315710872\" style=\"color: #0000ff;\"\u003eV-Block\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e to form the tubing around. With this setup you would use a \u003cstrong\u003e\u003ca href=\"http:\/\/www.ferreestoolsinc.com\/products\/f10-dent-hammers?variant=1101999596\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eF10A or B dent hammer\u003c\/a\u003e\u003c\/strong\u003e to burnish and push the metal back to a nice cylindrical form. You are not supposed to hammer, directly ON a ball. You use the ball as a form or mandrel and then hammer right next to the ball radius; essentially making the ball a hammer or form, from the inside out.\u003cbr\u003e \u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003e~REPAIR TIP~\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e Remember, the more you hammer direct, the thinner and harder and larger the metal gets and work hardening sometimes creates cracks. You may have to anneal, and that gets messy with all the posts and sometimes tone holes. But, if you label everything and draw some pictures you will probably be okay, anyway, lacking a \u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003eZ60\u003c\/strong\u003e \u003c\/span\u003eand either a \u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.ferreestoolsinc.com\/products\/the-z61-base?variant=13820719300\" style=\"color: #0000ff;\"\u003eZ61\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e, \u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.ferreestoolsinc.com\/products\/z61e-base?variant=13820995268\" style=\"color: #0000ff;\"\u003eZ61E Base \u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003eor a \u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.ferreestoolsinc.com\/products\/z61s_floor_mount_stand?variant=1029470672\" style=\"color: #0000ff;\"\u003eZ61S Stand\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e and some toys, of course. Then, the dents just kind of roll out. There are times however, that you must anneal BEFORE using even the dent machine.\u003cbr\u003e \u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003eA NOTE ON BALLS IN HALF SIZE GRADUATIONS\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e These balls help provide a more precise fit, because many new instruments are thinner than they used to be, these in between sized balls allow removal of dents without over expanding the tubing. They produce a better finish especially in the new French Horns, trombones and trumpets.\u003c\/p\u003e","published_at":"2019-10-06T20:59:48-04:00","created_at":"2019-10-06T20:59:48-04:00","vendor":"Ferree's Tools Inc.","type":"Brasswind","tags":["Dent Balls"],"price":782,"price_min":782,"price_max":2030,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31275849613360,"title":"N80A-5\/16","option1":"N80A-5\/16","option2":null,"option3":null,"sku":"N80A-5\/16","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"N80A Ball Type Dent Balls - N80A-5\/16","public_title":"N80A-5\/16","options":["N80A-5\/16"],"price":782,"weight":57,"compare_at_price":null,"inventory_quantity":84,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":31275849646128,"title":"N80A-3\/8","option1":"N80A-3\/8","option2":null,"option3":null,"sku":"N80A-3\/8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"N80A Ball Type Dent Balls - N80A-3\/8","public_title":"N80A-3\/8","options":["N80A-3\/8"],"price":782,"weight":57,"compare_at_price":null,"inventory_quantity":22,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":31275849678896,"title":"N80A-7\/16","option1":"N80A-7\/16","option2":null,"option3":null,"sku":"N80A-7\/16","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"N80A Ball Type Dent Balls - N80A-7\/16","public_title":"N80A-7\/16","options":["N80A-7\/16"],"price":782,"weight":57,"compare_at_price":null,"inventory_quantity":120,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":31275849711664,"title":"N80AS - SET OF 3 (10-24 thread)","option1":"N80AS - SET OF 3 (10-24 thread)","option2":null,"option3":null,"sku":"N80AS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"N80A Ball Type Dent Balls - N80AS - SET OF 3 (10-24 thread)","public_title":"N80AS - SET OF 3 (10-24 thread)","options":["N80AS - SET OF 3 (10-24 thread)"],"price":2030,"weight":57,"compare_at_price":null,"inventory_quantity":23,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.ferreestoolsinc.com\/cdn\/shop\/products\/N80_A.jpg?v=1574360097","\/\/www.ferreestoolsinc.com\/cdn\/shop\/products\/N80_ALL.jpg?v=1574360042"],"featured_image":"\/\/www.ferreestoolsinc.com\/cdn\/shop\/products\/N80_A.jpg?v=1574360097","options":["Size"],"media":[{"alt":"N80AS Set of 3 Balls","id":5719713546288,"position":1,"preview_image":{"aspect_ratio":1.333,"height":2736,"width":3648,"src":"\/\/www.ferreestoolsinc.com\/cdn\/shop\/products\/N80_A.jpg?v=1574360097"},"aspect_ratio":1.333,"height":2736,"media_type":"image","src":"\/\/www.ferreestoolsinc.com\/cdn\/shop\/products\/N80_A.jpg?v=1574360097","width":3648},{"alt":"ALL N80 Balls","id":5719717871664,"position":2,"preview_image":{"aspect_ratio":1.333,"height":2736,"width":3648,"src":"\/\/www.ferreestoolsinc.com\/cdn\/shop\/products\/N80_ALL.jpg?v=1574360042"},"aspect_ratio":1.333,"height":2736,"media_type":"image","src":"\/\/www.ferreestoolsinc.com\/cdn\/shop\/products\/N80_ALL.jpg?v=1574360042","width":3648}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eSet of 3 balls (10-24 thread) that can be used on the \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"http:\/\/www.ferreestoolsinc.com\/products\/n54_knuckle_dent_rods?variant=1166541004\" target=\"_blank\" style=\"color: #0000ff;\" rel=\"noopener noreferrer\"\u003e\u003cstrong\u003eN54 Knuckle Tools\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e, the \u003cstrong\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"http:\/\/www.ferreestoolsinc.com\/products\/n68_right_angle_mandrel?variant=1166541104\" target=\"_blank\" style=\"color: #0000ff;\" rel=\"noopener noreferrer\"\u003eN68 Right Angle Mandrel\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e and the \u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.ferreestoolsinc.com\/products\/n91_tapered_mandrels?variant=1045255732\" style=\"color: #0000ff;\"\u003eN91B Tapered Mandrel\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e. These dent balls are designed spherically, so there is no possibility of making lateral ridges in the tubing. Made of chrome steel with a satin sandblast finish. This finish has minute pores which hold Vaseline (or any other lubricant) longer for easy use in tubing.\u003cbr\u003e \u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003e~REPAIR TIP~\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e Better Dent Work Using Your Dent Hammer\u003cbr\u003e Normally, you would use round balls (N80D or N80E) screwed on 5\/8 or 3\/4 rods like \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/www.ferreestoolsinc.com\/products\/n31_dent_rod?variant=1166540836\" style=\"color: #0000ff;\"\u003e\u003cstrong\u003eN31\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e or a \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/www.ferreestoolsinc.com\/products\/n74-straight_dent_rod?variant=1166541132\" style=\"color: #0000ff;\"\u003e\u003cstrong\u003eN74\u003c\/strong\u003e \u003c\/a\u003e\u003c\/span\u003emounted in a vise with a \u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.ferreestoolsinc.com\/products\/l14_v-blocks?variant=1315710872\" style=\"color: #0000ff;\"\u003eV-Block\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e to form the tubing around. With this setup you would use a \u003cstrong\u003e\u003ca href=\"http:\/\/www.ferreestoolsinc.com\/products\/f10-dent-hammers?variant=1101999596\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eF10A or B dent hammer\u003c\/a\u003e\u003c\/strong\u003e to burnish and push the metal back to a nice cylindrical form. You are not supposed to hammer, directly ON a ball. You use the ball as a form or mandrel and then hammer right next to the ball radius; essentially making the ball a hammer or form, from the inside out.\u003cbr\u003e \u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003e~REPAIR TIP~\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e Remember, the more you hammer direct, the thinner and harder and larger the metal gets and work hardening sometimes creates cracks. You may have to anneal, and that gets messy with all the posts and sometimes tone holes. But, if you label everything and draw some pictures you will probably be okay, anyway, lacking a \u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003eZ60\u003c\/strong\u003e \u003c\/span\u003eand either a \u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.ferreestoolsinc.com\/products\/the-z61-base?variant=13820719300\" style=\"color: #0000ff;\"\u003eZ61\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e, \u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.ferreestoolsinc.com\/products\/z61e-base?variant=13820995268\" style=\"color: #0000ff;\"\u003eZ61E Base \u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003eor a \u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.ferreestoolsinc.com\/products\/z61s_floor_mount_stand?variant=1029470672\" style=\"color: #0000ff;\"\u003eZ61S Stand\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e and some toys, of course. Then, the dents just kind of roll out. There are times however, that you must anneal BEFORE using even the dent machine.\u003cbr\u003e \u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003eA NOTE ON BALLS IN HALF SIZE GRADUATIONS\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e These balls help provide a more precise fit, because many new instruments are thinner than they used to be, these in between sized balls allow removal of dents without over expanding the tubing. They produce a better finish especially in the new French Horns, trombones and trumpets.\u003c\/p\u003e"}

N80A Ball Type Dent Balls

Product Description

Set of 3 balls (10-24 thread) that can be used on the N54 Knuckle Tools, the N68 Right Angle Mandrel and the N91B Tapered Mandrel. These dent balls are designed spherically, so there is no possibility of making lateral ridges in the tubing. Made of chrome steel with a satin sandblast finish. This finish has minute pores which hold Vaseline (or any other lubricant) longer for easy use in tubing.
~REPAIR TIP~
Better Dent Work Using Your Dent Hammer
Normally, you would use round balls (N80D or N80E) screwed on 5/8 or 3/4 rods like N31 or a N74 mounted in a vise with a V-Block to form the tubing around. With this setup you would use a F10A or B dent hammer to burnish and push the metal back to a nice cylindrical form. You are not supposed to hammer, directly ON a ball. You use the ball as a form or mandrel and then hammer right next to the ball radius; essentially making the ball a hammer or form, from the inside out.
~REPAIR TIP~
Remember, the more you hammer direct, the thinner and harder and larger the metal gets and work hardening sometimes creates cracks. You may have to anneal, and that gets messy with all the posts and sometimes tone holes. But, if you label everything and draw some pictures you will probably be okay, anyway, lacking a Z60 and either a Z61, Z61E Base or a Z61S Stand and some toys, of course. Then, the dents just kind of roll out. There are times however, that you must anneal BEFORE using even the dent machine.
A NOTE ON BALLS IN HALF SIZE GRADUATIONS
These balls help provide a more precise fit, because many new instruments are thinner than they used to be, these in between sized balls allow removal of dents without over expanding the tubing. They produce a better finish especially in the new French Horns, trombones and trumpets.

Sku: N80A-5/16
$ 7.82
Maximum quantity available reached.

Ferree's Tools Shipping Overview

  • We offer Free Shipping on all orders, ALL OVER THE WORLD!
  • We do charge a handling fee (much less than the cost of shipping) extra packaging precautions to ensure safe and timely delivery.
  • We will ship your orders the most economical way. 
  • If your package is delivered and then stolen Ferree's is not responsible.  If you live in an area prone to stealing please have your package shipped to a ship station or post office so that you can pick it up.
  • If you choose to pick your carrier, or next day shipping on your orders you WILL be charged the shipping cost.
  • Because of Federal Laws chemicals must ship via ground transportation.
  • Chemicals cannot be shipped overseas.
  • International Shipments, we cover the shipping cost only - we DO NOT cover the import duties/taxes charged by other countries, nor do we cover the extra carrier cost if imposed on the International shipment.
  • If you refuse to accept your order from the carrier for any reason and it is returned to us you will get a refund minus the return postage when it is received.  This apples to all domestic and International shipments.
  • If you refuse to accept your order from the carrier for any reason and it is not returned to us, you will not get a refund of your order.  This applies to all domestic and International shipments

Ferree's Tools Return Policy

Any return must have an RMA #.  Please contact the office to receive this number.

  • We appreciate your business and want you to be 100% satisfied.  If for any reason you need to return our products you must do so within 30 days in order to get a full refund.  Any return after 30 days is subject to a restocking fee determined by the amount of the order, condition of the item and age of the item being returned.
  • Returns are not accepted for any item after 180 days from the invoice date.
  • Returns are not accepted for any item that was manufactured per your instructions and are not our standard tools.
  • Any standard tool manufactured at Ferree’s is warranted to be free from defect for a period of 1 year.  We will at our discretion repair or replace your tool.  You must return the tool to Ferree’s for this warranty to be valid.
  • We will refund shipping cost to return the item if it is within the 30 day timeframe.  If it is beyond the 30 days the customer pays return shipping.  If the item is damaged during return shipping we will charge you for the repair of the damage.  Shop rate is 90.00/hr.

Ferree’s Tools
Helping the Instrument Repair Tech and Do it Yourselfers
for over 75 years.
Thank you for your continued support!

           

FERREE’S TOOLS INC
1477 E MICHIGAN AVENUE
BATTLE CREEK MICHIGAN 49014
TOLL FREE: 800-253-2261    PH:  269-965-0511   
FAX:   269-965-7719

WWW.FERREESTOOLSINC.COM

OFFICE HOURS 8:30-3:00 (EST)** PLANT HOURS 6:30-3:00 (EST)
FOR TECHNICAL ASSISTANCE DURING PLANT HOURS PLEASE CALL OR EMAIL CURTIS FERREE OR STEVE WILLBUR
CURTIS@FERREESTOOLSINC.COM   269-224-6882
STEVE@FERREESTOOLSINC.COM    269-224-6877
 
OFFICE CONTACT INFORMATION
CANDY RAY 
 CANDY@FERREESTOOLSINC.COM  269-224-6886
  
OFFICE MGR.-TAMI FERREE 
 TAMI@FERREESTOOLSINC.COM  269-224-6881
 
“ WE SELL ONLY THE BEST AND WE SELL TO EVERYONE”
 
ORDERING GUIDELINES
  • Phone orders are taken Monday through Friday 8:30am – 3:00pm Eastern Standard Time
  • Fax and email orders can be sent anytime and will be processed on the next business day. 
  • Web store orders are taken 24/7/365 and will be processed on the next business day. 
  • There is a $25.00 minimum for all orders.
  • Changes to orders after they are placed will be subject to a 15.00 handling fee.
  • Rush orders are accepted and will ship same day if placed before 11:00am or next day if placed after 11:00am (est).  Rush fees are listed below
               Order value                           Fee
                              Up to 100.00      $15.00
                              100.01-500.00   $20.00
                              Over 500.00        $25.00
 
PAYMENT OPTIONS
  • ALL orders must be paid for in advance of shipping unless you have established an account. 
  • Credit Card     
    •  Visa, MasterCard, Discover and American Express are  accepted.
  • PayPal             
    • Use your PayPal account to pay directly from your bank.  We can use this for net 30 customers as well.
  • Chk in Advance 
    • If you wish to pay by check we will email you an invoice for your order.  Your order will not ship until the payment has cleared the bank.  This could result in delayed shipping.
  • Open Accts        
    • All open accounts are subject to credit approval.  If you have not placed an order in over a year your account will be reviewed prior to shipping a new order.  Strict 30 day terms for all open accounts.  
 
 
PLEASE INCLUDE YOUR CUSTOMER I.D. ON ALL INQUIRIES, ORDERS, PAYMENTS AND RETURNS TO ENSURE PROPER PROCESSING.
 
 
 
 
PRICING INFORMATION
  • PLEASE VISIT THE WEBSITE FOR UP TO DATE PRICING
  • Prices are in U.S. Dollars and are subject to change without notice.
  • Discounts are listed on the web store for bulk purchases of certain items.
  • Quotes are valid for 30 days.  No exceptions.
 
SHIPPING
  • We offer Free Shipping on all orders.
  • We do charge a handling fee which is far less than the shipping cost)
  • We will ship your orders the most economical way. 
  • If you choose to pick your carrier, or next day shipping on your orders you WILL be charged the shipping cost.
  • Because of Federal Laws chemicals must ship via ground transportation.
  • Chemicals cannot be shipped overseas.
  • International Shipments - we DO NOT cover the import duties/taxes charged by other countries, nor do we cover the extra carrier cost if imposed on the International shipment.
  • If you refuse to accept your order from the carrier for any reason and it is returned to us you will get a refund minus the return postage when it is received.  This apples to all domestic and International shipments.
  • If you refuse to accept your order from the carrier for any reason and it is not returned to us, you will not get a refund of your order.  This applies to all domestic and International shipments
 
RETURN POLICY
Any return must have an RMA #.  Please contact the office to receive this number.
  • We appreciate your business and want you to be 100% satisfied.  If for any reason you need to return our products you must do so within 30 days in order to get a full refund.  Any return after 30 days is subject to a restocking fee determined by the amount of the order, condition of the item and age of the item being returned.  Freight for the return is not always refunded.  We determine this on a case by case basis.
  • Returns are not accepted for any item after 180 days from the invoice date.
  • Returns are not accepted for any item that was manufactured per your instructions and are not our standard tools.
  • Any standard tool manufactured at Ferree’s is warranted to be free from defect for a period of 1 year.  We will at our discretion repair or replace your tool.  You must return the tool to Ferree’s for this warrant to be valid.
  • If you refuse to accept your order from the carrier for any reason and it is returned to us you will get a refund minus the return postage when it is received.  This apples to all domestic and International shipments.
  • If you refuse to accept your order from the carrier for any reason and it is not returned to us, you will not get a refund of your order.  This applies to all domestic and International shipments
 
THANK YOU FOR CHOOSING FERREE’S

Related Products