G71 Bell Tenon Sets Clarinets

The taper of the arbor fits clarinet bores better and acts as a pilot; making a more accurate cut with less chance of the cutter drifting off center. The cutter is held in the lathe chuck and reversed to make the step cut, if necessary. You can do a better finished job than by trying to thread a new tenon in, or some other method. These tenons, when glued in with G19 Clear Magic, are as strong as or stronger than the original tenon was in many cases.
G71B Bell Tenon Set for Bb soprano clarinet
G71E Bell Tenon Set for Eb soprano clarinet

Replacement Cutters
G71C Bb Clarinet Cutter for G71B
G71F Eb Clarinet Cutter for G71E